acrlyic

So building a small acrylic tank, test how easy it is. It's only tiny, but I filled it with water today, and I think I have a small leak It's only one side. I used a different glue on that side compared to the rest. On that side, I used Tensol 12 compared to the other side using Acrifix 192

Question for everyone, I just brought a second-hand Acrylic tank, wasn't brought from an LFS, and I was told it had big scratches inside, and they have polished them out. I am worried about what was used to do the cut & polish, so what is the best thing I can use to clean the inside of the tank...

Hi to all, I created a roller filter, partly 3d Printed, partly cutув from acrylic. Controlled by Atiny microcontroller. It has only one float switch. After the rising water level to a float switch the roller rewinding canvas for 15 seconds and goes standby for 1 hour. The gearbox is designed...

Hey! I‘ve had my aquarium for about 8-9 years now, and I thought that I would share my reef and the experience that I’ve got from it with you guys. I have a 340l/90g acrylic tank from schuran. I use two VorTech Mp40 wavemakers, 1 versa return pump, a gro-tech algae reactor, clari sea roll...

I m trying to build an Acrylic tank with the following dimension: 48"L 18"H 18"W or maybe have the width would be around 23" . What would be a good thickness ?

Moving and I have some left over acrylic from building tanks and other projects. 5 pieces of 1/4" cast clear acrylic (13 & 3/4 x 9") 1 piece .177" transparent caramel acrylic (12x12") Half full weld on 16 tube I'll also throw in a bunch of odd-sized scrap acrylic in case you want to use any...