- Joined
- Apr 13, 2016
- Messages
- 99
- Reaction score
- 75
This stuff is all boxed up except the Vertex Reactor. Date shows 11/02 because I planned on posting this yesterday but couldn't get my forum permission to show up, I can unbox and retake with 11/03 if needed though..
I was more active on Nanoreef until about 2018, I got busy with a 50 hr/week job and had less time for forums.
https://www.nano-reef.com/profile/83928-halo_003/ - NR profile
Prices are shipped from 32821 (or meet in front of WWC's newest store in Orlando), Paypal goods only, no Paypal Friends and Family.
2x Kessil A360WE with Spectral Controller and Goosenecks
I bought these on R2R last year. Very minor rusting on mount brackets (not sure if they were in a hood before). No issues when not using the controller, but I was occasionally seeing blue channel flicker on one of them when plugged into the controller, no idea why. My guess is a loose wire on the 0-10V input. Includes 2x 6 ft gray male-male aux cables for the 0-10V input, and one of the original black ones. The other original black cable was slightly bent which I suspect is what loosened the connector for 0-10V input. Should be an easy fix if opened up and soldered, I have another light that I built though. I let both of them sit for 9 hours yesterday not plugged into the controller and didn't see any flicker.
$450 shipped
Simplicity DC 120 Skimmer
Used in total for ~ 2 months in 2018, otherwise virtually unused. There's a little bit of glue residue on the skimmer cap that was resilient from when I had to pack it to move cross country. Tested yesterday so it's wet in the pictures:
$150 shipped
Vertex RX 1.5U reactor
This was just too big for my sump, I had to use a BRS one instead. A couple of small flakes of carbon are in the sponges but I'm working to get them out today. Used for about 3 months total, purchased last year. I do recommend plumbers tape on the union threads, these things are notorious for small leaks at the unions (though not an issue for an in sump install).
$90 shipped - still need a box for it so may have a 1 day delay on shipping.
Sicce 4000 LPH Pro Pump
As is, I lost the barb attachments after 3 cross country moves (busy year!). Bought in 2016 I believe and used for about 8 months total in a closed loop system. The output is 1" thread. Great pump, I'm actually not super motivated to sell it but figured if I do I have an excuse to get a Vectra.
I was more active on Nanoreef until about 2018, I got busy with a 50 hr/week job and had less time for forums.
https://www.nano-reef.com/profile/83928-halo_003/ - NR profile
Prices are shipped from 32821 (or meet in front of WWC's newest store in Orlando), Paypal goods only, no Paypal Friends and Family.
2x Kessil A360WE with Spectral Controller and Goosenecks
I bought these on R2R last year. Very minor rusting on mount brackets (not sure if they were in a hood before). No issues when not using the controller, but I was occasionally seeing blue channel flicker on one of them when plugged into the controller, no idea why. My guess is a loose wire on the 0-10V input. Includes 2x 6 ft gray male-male aux cables for the 0-10V input, and one of the original black ones. The other original black cable was slightly bent which I suspect is what loosened the connector for 0-10V input. Should be an easy fix if opened up and soldered, I have another light that I built though. I let both of them sit for 9 hours yesterday not plugged into the controller and didn't see any flicker.
$450 shipped
Simplicity DC 120 Skimmer
Used in total for ~ 2 months in 2018, otherwise virtually unused. There's a little bit of glue residue on the skimmer cap that was resilient from when I had to pack it to move cross country. Tested yesterday so it's wet in the pictures:
$150 shipped
Vertex RX 1.5U reactor
This was just too big for my sump, I had to use a BRS one instead. A couple of small flakes of carbon are in the sponges but I'm working to get them out today. Used for about 3 months total, purchased last year. I do recommend plumbers tape on the union threads, these things are notorious for small leaks at the unions (though not an issue for an in sump install).
$90 shipped - still need a box for it so may have a 1 day delay on shipping.
Sicce 4000 LPH Pro Pump
As is, I lost the barb attachments after 3 cross country moves (busy year!). Bought in 2016 I believe and used for about 8 months total in a closed loop system. The output is 1" thread. Great pump, I'm actually not super motivated to sell it but figured if I do I have an excuse to get a Vectra.