So I’ve got a 10 gallon qt with two clowns in. I want to treat with cupramine, but is 78° okay or should I raise it up? Following a guide I plan to keep them in copper for 30 days. Should my initial dose be
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
No not for cupramine, that will seriously hurt the fish. @Thatdude156 i usually do half the dose then another half dose and keep constant readings with a copper test kit.Do you have a copper tester? You should start at 1PPM and slowly raise to 2-2.5PPM aver a couple of days.
Thanks for catching that I sure don't want to give bad advice. I am using copper power.No not for cupramine, that will seriously hurt the fish. @Thatdude156 i usually do half the dose then another half dose and keep constant readings with a copper test kit.
Yes I do. Cupramine says for a 10.5 gallon go dose 1ml or 20 drops then 48 hrs later dose another. Ive dosed the correct amount following that. My question is should the temp be 78° or should it be higher like 82°? I also see that some say 14 days while others say 30 days.Do you have a copper tester? You should start at 1PPM and slowly raise to 2-2.5PPM aver a couple of days.
keep my temperature at 78 but sometimes fluctuates by a degree due to the hot weather. That being said I have never lost a fish after quarantining with cupramine!Yes I do. Cupramine says for a 10.5 gallon go dose 1ml or 20 drops then 48 hrs later dose another. Ive dosed the correct amount following that. My question is should the temp be 78° or should it be higher like 82°? I also see that some say 14 days while others say 30 days.