Screw size for X bracket

[rphman]

hello couple things

Whats screw size that holds light on to X bracket (center hole) and also and advise words of wisodom ***** on mounting these lights inside of canopy to the canopy itself ?

thanks
-wade

 

[Ken101Ward]

hello couple things

Whats screw size that holds light on to X bracket (center hole) and also and advise words of wisodom ***** on mounting these lights inside of canopy to the canopy itself ?
tank
thanks
-wade

I just finished hanging my K7 pro 3's last week. Though i don't know the screw size, I do know that x bracket doesn't lend itself to easy mounting to anything other than the adapter plate included with the full tank mount. I ended up drilling a 5/16" hole in the adapter plate, then mounted it to the x bracket, took that assembly and mounted it to an 80/20 aluminum rail. I hung the rail from the ceiling but it could also be drilled and screwed to a canopy.
Back to that tiny center hole screw. I'd bet all the tea in china that it's metric given the origin of the product.

 

[Reefer Reboot]

Center hole of the "x bracket" is M4 x 0.7. The outer four holes are M3 x 0.5.
I drilled and tapped a M4 x 0.7 thread into a standard 90 degree gusset and mounted the bracket to that first and then attached the light to the bracket. Then you can mount the whole thing onto a t-slot frame. At least that's one option.

 

[Gtinnel]

I originally tried to mount mine by leaving a long screw sticking up out of the x brackets center hole, and with a washer hanging it from a piece of 80/20 rail. With the x bracket just hanging from the center screw and not pulled up tight to anything the x bracket cracked on all of my lights.
So I ended up spacing two rails out to where they lined up with the holes in the light. I then put some longer screws in the light and with some washers hung them from the dual rail. It worked out well and if they’re ever in the way they can be slid down the rail to wherever you want.
If you can mount some aluminum rails in your canopy attaching the lights it fairly easy. If you’re willing to have some holes drilled in the top of your canopy for the screw holes and fans you could probably directly mount them to the top of the canopy.

 

[rphman]

Center hole of the "x bracket" is M4 x 0.7. The outer four holes are M3 x 0.5.
I drilled and tapped a M4 x 0.7 thread into a standard 90 degree gusset and mounted the bracket to that first and then attached the light to the bracket. Then you can mount the whole thing onto a t-slot frame. At least that's one option.

i was thinking of getting some t channel like this


then finding some t bolts that fit the screw size and slides in channel..

can you show me a pic of what you used ? gusset and track?

@Gtinnel im leaning towards maybe just using machine screw thru top of canopy

here is canopy

Elegance Canopy (Contact Us For Freight Quote)

www.mattscorals.com

thanks for responding and giving me info

thanks again!!!

 

[rphman]

WEN WAT480 48-Inch Universal T-Track Kit for Woodworking, 2-Pack

Modular, universal design accepts the majority of T-track accessories on the market Constructed of sturdy, corrosion-resistant anodized aluminum Includes pre-drilled holes for quick installation Measures in at 48 by 3/4 by 3/8 inches Compatible with the entire WEN Universal T-track series of...

wenproducts.com

 

[rphman]

I just finished hanging my K7 pro 3's last week. Though i don't know the screw size, I do know that x bracket doesn't lend itself to easy mounting to anything other than the adapter plate included with the full tank mount. I ended up drilling a 5/16" hole in the adapter plate, then mounted it to the x bracket, took that assembly and mounted it to an 80/20 aluminum rail. I hung the rail from the ceiling but it could also be drilled and screwed to a canopy.
Back to that tiny center hole screw. I'd bet all the tea in china that it's metric given the origin of the product.

can you share pic pf your setup
yep you win all the tea!! its gotta be metric and others just confirmed!!

 

[Ken101Ward]

can you share pic pf your setup
yep you win all the tea!! its gotta be metric and others just confirmed!!

I'll share a picture later when I get home. Here's the supplies I got from McMaster Carr for mounting the fixtures.

 

[Ken101Ward]

can you share pic pf your setup
yep you win all the tea!! its gotta be metric and others just confirmed!!

Here's a picture of my mounting method.

 

[Reefer Reboot]

i was thinking of getting some t channel like this


then finding some t bolts that fit the screw size and slides in channel..

can you show me a pic of what you used ? gusset and track?

Drill and tap the hole,

then attach bracket, light and mount to t-slot rail,