stand

Ok so I’m getting a ton of PMs I can’t possibly reply to about help in designing T-slot stands using affordable t-slot products from zyltech.com I have no affiliation with zyltech (I believe they are actually more of a 3d printing company than T-slot supplier) but have found them to have great...

Hello, everyone! After searching for an affordable tank stand without success, I decided to design my own. Through a family member, I have access to the tools necessary to construct this build. That said, I have never built something like this and am seeking feedback from the community to make...

So, maybe this is obvious, though I have a built a few stands in my day and seen a good bit of them over the years. That said they all look rather similar. I was building a stand for my 240g and wanted to try something a little different, and came up with the below. I thought it was a good idea...

Hey guys I’m not sure if this is the correct thread for this…. But I have a question on a stand. I have attached a picture of my 40 gallon breeder setup but I just purchased my first house and am upgrading to a 75 gallon. Can I do the same stand setup with this bigger tank? It will be setup...

I’m wondering if these screws would be sufficient for building my new aquarium stand for my 25g acrylic corner tank. (Pic of screws below) It also says not to used with untreated cedar on the back because it can cause a chemical reaction with the wood. If these won’t work what’s a type of screw...

Hey R2R, First post here (I think). I'm totally new to the saltwater world, and am looking to setup a SCA 120 gallon eurobraced tank. I'd like to tackle building the stand/cabinet myself, but I'm no woodworker. But, with a little help from a few friends, I think I can get it done. Could...

Hey guys, I'm getting back into the hobby after a year off due to work commitments. I really missed it. So, I've gone with the Aqua Nano 40 Cube (40x40cm) for my tank. I thought of buying the stand for it but realized that I could DIY one for a fraction of the price, so I've given myself this...

I was tight on space and looked high and low for a good size match for Fluval Evo 13.5. Just wanted to save others time if they are in the same boat. This worked very well as an Evo stand; nearly the same size so little extra wasted space...

Running those gutted leds directly off solar panels, can it be done? https://youtube.com/shorts/oZkUAF9Deug check out my 5gallon reef bowl

Looking to buy a tank setup with at least tank stand sump and plumbing, looking for 65+ gallons and not trying to completely break the bank for something used. Thanks

***SOLD***I have an ~500 gal peninsula style acrylic aquarium for sale in Tampa, FL. Dimensions are 84L x 33W x 43H with 1” thick acrylic all around. Aquarium has two 1 1/2” over flows and two 1” returns. Aquarium is in great shape with minor scratches, and is currently crated due to military...

Hello Reefers, For those who are unfamiliar with what we do, we offer a variety of 3D printed reef accessories ranging from controller brackets, to custom prints. (feel free to check out our website!). With that being said, some of our most popular items are our coral frag plug sand stands and...

Selling my 200 double deep starfire tank. Comes with stand and trigger system sump. Tank dimensions are 4 foot long, 3 feet deep 2.5 feet high. Pm for more details.

Hey guys I have a 32 galllon biocube and the coralife stand with it. Now I set everything up and have it placed on hardwood floor but first my stand had a little wobble as far as I can tell it’s from the floor if I bring it out from the wall it doesn’t wobble nearly as much but I can’t just...

Hey all, As I wait for my custom SCA I'm trying to get the ball rolling on the stand in the meantime. I've seen King of DIY and Rocket Engineer's dimensional lumber plans but I have seen numerous posts and comments regarding how they're way over built as far as strength and that a plywood build...

Hello, I am looking into setting up a Waterbox AIO 50.3. The only spot it works in my house is in my home office which has a brand new low pile carpet. Of course I want to make sure this tank is stable. Any recommendations? I was thinking putting some plywood or foam between the stand and the...

I’m looking for advise on a stand for my 200 gallon (60 x 30) peninsula tank build. I’m looking for a decorative open stand. All plumbing, sump, reactors, etc will be located through the wall in the garage. Only the tank will sitting on the stand, nothing planned for underneath. My wife...

Hello, I am upgrading my tank in the next month and will have this set up available for sale. Only thing I am selling is the Tank The stand and the sump. It’s about 15 months old and in excellent condition. My wife bought me a custom 225g so that’s the only reason why I’m selling this set up...

The front is where the cabinet door will be but it wouldn't offer any structural support. It's just the 3 panels that will be supporting it vertically, I fear it won't be sturdy enough to hold the 20 gallon tank and it has a slight wobble to it already. Maybe if I Wood glue the connection points...

dose anyone know of a stand that i can use for my 20 gal water box that is coming besides the one water box makes and that dosent cost as much

My plan for the tank is to wrap the stand with some pine and cover up the powder coated stand it’s on. I was curious if I need to get treated wood, or will regular wood be suitable if I just applied some type of finish on it to help repel water? Any advice would be appreciated!

Going through my phones gallery, I noticed that I have built quite a few stands :D Thought it would be nice to see what other people have been building lately for some future project inspiration! Here's a few I've completed (most of them for others) Show us what you've built! A Maple 35 Gal...

_

I have a 56 gallon tank that I was using as a quantine/emergency tank but it sprung a leak. The sealant could be replaced easily enough if someone has the time, I don’t. The stand has some swell spots, again they could be fixed easily enough if someone wanted to. I’m in the Utica-Rome area, I’d...

NEW PRICE updated in title. Purchased NEW in February. 90gallon 36"x24"x24" with sump and black stand. Reef Pro 90 Gallons System Includes 36" x 24" x 24" (approx), TRUE dimension 35.5" x 23.7" x 23.7" Rimless Glass Tank with 3 sides ultra clear/low iron. The black on the back is applied...