Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
If I recall some people have had more success with the red check valves
Those are the ones I m using. I'm also using 1/8th inside diameter tubing it's makes a tighter seal around the fittings. It could be the head not pinching the line enough or a small air leak in the line that's letting it loose pressure in the line and letting fluid leak out.If I recall some people have had more success with the red check valves
That’s more or less the reason.I don't get why there would be siphon unless the heads don't pinch the tube tight enough.
You could try wrapping some duct tape or something like that around the output shaft of the motor that would put more pressure on the rollers putting more pressure on the line. I had an old jedao pump that dripped and I put a piece shrink wrap around the output shaft of the motor and it stop it from leaking. But if it's not a year old it's still under warranty so I would email them about it maybe they could sending you a heads.That is what I’m thinking but have no idea how to fix. It’s a good price for the pump but overdosing is a serious flaw if it can’t be fixed. Unfortunately I bought two of these pumps. I may have to figure a way to mount the pumps much lower instead of on the wall above my sump.
I don't get why there would be siphon unless the heads don't pinch the tube tight enough.
Glad you posted this. I was thinking of getting one but might have to rethink thatOld thread but since im looking for a new doser as my coral box failed and dumped my triton solution into my tank figured i post my experience after a year of use on the coral box doser
Old thread but since im looking for a new doser as my coral box failed and dumped my triton solution into my tank figured i post my experience after a year of use on the coral box doser