Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I programmed mine the way I wrote it, works great since it's a virtual outlet, he will need to select feeder on his actual feeder not necessarily the virtual outlet.Where it says control type hit that and it should say feeder.. Do that first and then give a screen shot...
what should i write there @leepink23i show two pumps pump_2_4 and pump_2_6 you guys know the reason for this?
this is how my pump set up looks
Where it says feeder, go to settings, program the times.. I have mine spit out Pellets at 10 am and then 2 more times.. Once yiur done update and turn to auto...also quick question why does it show so many modules?
I only have de dosing pumps
the DDR
my skimmer
my return pump
gyre
Atk
and Auto feeder
This is your outlet for on the eb832, what is programmed here? This would not be your feederwhat should i write there @leepink23
Where it says feeder, go to settings, program the times.. I have mine spit out Pellets at 10 am and then 2 more times.. Once yiur done update and turn to auto...
Now im confused!!! sorryThis is your outlet for on the eb832, what is programmed here? This would not be your feeder
here is where the return pump is connectedThis is your outlet for on the eb832, what is programmed here? This would not be your feeder
For the auto feeder.. The little gear icon hit that and that gives you the programming... Then u need to update it to the cloud... Then go back to your dashboard and set feeder to auto...Now im confused!!! sorry
This is your feeder outlet, which you want to program like the one I just posted, then your feeder will come on at 1030 and 1900, if you program your virtual outlet the way i showed you it will come on at 1029 and off at 1035 on at 1859 and off at 1905. Then next your outlets for your return pump, powerheads and skimmer will need to be programmed.
Rename it return pump, will make it easier to identify for you.here is where the return pump is connected
So the feeder is configured according to your pictureThis is your feeder outlet, which you want to program like the one I just posted, then your feeder will come on at 1030 and 1900, if you program your virtual outlet the way i showed you it will come on at 1029 and off at 1035 on at 1859 and off at 1905. Then next your outlets for your return pump, powerheads and skimmer will need to be programmed.
Yeap, next I will screen shot what he is referring to set to auto, that way it will only cut on at the right times programmed.Got it i think
Yes now you need to go to your return pump and program this:So the feeder is configured according to your picture
so to turn of the return pump, powerhead, and skimmer i have to program how you showed me?
So now go to the outlet for your return pump and add this:So here is what i have
Once you do that then we need to program your skimmer and power heads.So now go to the outlet for your return pump and add this:
If output auto_feed on then off
This will cut your return pump off during those times because the virtual outlet will be on. This will allow the pumps to go off for 1 minuted before feeding and stay off for 5 minutes after.