Well started plumbing vectra return pumps in... I have one on my return and one on my closed loop. I decided to start with the return section .... I also redid my drain lines ... I got everything plumbed in and seems to be ok... I will know more when I have a full amount of water to run the pump at its max setting..... I gotta say... This pump is DEAD silent.... Holy cow..... I can't believe it.... I can't wait to see how it puts out.....
Here's a comparison .. I have extreme doubts that the flow will come close after looking at this picture....
Before I had the reeflo returning to the tank with 3 1" return lines ... Now it is plumber down to 5 3/4" return lines... This will also power my chiller 10' above the tank and drain back down .... Will see how it dose ... I may need 2 vectra l1s for the return and one for the closed loop....
Here's a comparison .. I have extreme doubts that the flow will come close after looking at this picture....
Before I had the reeflo returning to the tank with 3 1" return lines ... Now it is plumber down to 5 3/4" return lines... This will also power my chiller 10' above the tank and drain back down .... Will see how it dose ... I may need 2 vectra l1s for the return and one for the closed loop....