Powerbar 6D seems to have mind of its own

[TCoach]

I have a Powerbar6D PAB and it seems to have a mind of its own. I’ve been noticing that certain outlets don’t seem to follow the programming they have. Anyone have any idea what is going on and how to fix?

Here is an example (starts at switch 6):

Thanks,
-Chris

 

[Gaël]

Hello,
Activate manual override and test each channel 1 by 1 to see exactly what it does not match, it may be an offset problem that will be solved by renumbering

Gaël.

 

[Lasse]

Do the test like Gaël suggest

Can you show how it is numbered - something like this - but you should have a 6 instead for a 19 like me if your PB starts with channel 6. You will find this in the System menu. The initial stage - after your own choice,

Sincerely Lasse

 

[TCoach]

Ok, figured out the problem but not sure how to fix.

Powerbar that came with the Profilux is a 5-1 and lives on switch outlets 1-5. For some reason the Powerbar 6D is overlapping and living on switch outlets 1-6?!?!?

Any idea how to fix and/or what I did wrong configuring it?

Thanks,
-Chris

P.S.

Merry Christmas/Happy Holidays to all

 

[TCoach]

Found fix. Had to update Firmware on the 6D. It then allowed me to move the switch number assignment!

Thanks,
-Chris