- Joined
- Jul 7, 2014
- Messages
- 32
- Reaction score
- 0
I have been wanting to add a decent skimmer to my nano cube so I finally purchased a HOB one, the problem is to make it work I had to give up my center compartment Filtration. I was using the JBJ Sponge, in the center Charcoal, and the bottom level contained GFO. This concerned me a bit, but I have only been in the hobby for a little over a year and I wanted to see what you all thought...
I have a second option which is move the HOB skimmer to the left most chamber and give up the one pump and the skimmer will let the water out into the smaller section where I currently have my heater.
I thought I researched enough on this but I guess I did not. Do you have any thoughts on this as to what is an acceptable trade off?
I have a second option which is move the HOB skimmer to the left most chamber and give up the one pump and the skimmer will let the water out into the smaller section where I currently have my heater.
I thought I researched enough on this but I guess I did not. Do you have any thoughts on this as to what is an acceptable trade off?