125 gallon + 90 gallon build

Joekr73

Community Member
View Badges
Joined
Jun 29, 2020
Messages
44
Reaction score
30
Location
West Virginia
What state or country do you live in
West Virginia
Rating - 0%
0   0   0
So I figured I should finally try to put a build thread together. Ive been reading these forums for a long time, just never really posted much except for a few questions here and there. I started a 90 gallon tank back in 2011. Tore it down because we moved in 2016 and didn't set it back up.
I got the itch to have a tank again in summer of 2020 but wanted to go bigger because we had the room. I found a used 125 gallon that was close to me so I decided to go that route. I bought an overflow and drilled the tank and then began building the stand. I put together a diy sump out of a 75 gallon tank I found at petco on sale, and some glass I bought from a local shop. We have a family friend who's an electrician so I had him install a new breaker box with dedicated breakers for the system and it has plenty of room for more if needed.
I have quite a few pictures so I'll try to spread this out and continue with another post.

20200731_193124.jpg 20200801_205407.jpg 20200802_183807.jpg 20200806_200545.jpg 20200818_165733.jpg 20200818_170223.jpg 20200820_211047.jpg 20200820_211054.jpg 20200820_211104.jpg 20200820_211118.jpg 20200820_211121.jpg 20200820_211129.jpg 20200822_165833.jpg 20200822_165901.jpg 20200822_172515.jpg 20200822_202209.jpg
 
Tried to sell the old 90 gallon tank but no one was buying, so I figured why not set it up and make it a fowlr since there were some fish I wanted that I would not put in a reef tank. So i built a stand for it and just plumbed it into the same sump.
20210216_205954.jpg
20210131_034545.jpg
20210216_210010.jpg


20210120_203235.jpg
 
Was having to make water constantly for top off so upgraded the container to this 50 gallon tank. Plus I was having issues with low ph. I was going to run a line from the skimmer outside but it was just too far so I installed a fresh air intake/blower and brought that straight to where the skimmer is. Also upgraded the skimmer since I now had two tanks to filter.
20210216_210318.jpg
20210216_210337.jpg
20210223_095156.jpg
20210412_192447.jpg
20210414_172450.jpg
20210216_210028.jpg
 
Thank you!

A few more things to add. I added a uv sterilizer, kalk reactor and an algae turf scrubber.
20210308_165700.jpg
20210401_194325.jpg
20210414_172450.jpg
 
Builds look great man.

Word of advice, ditch the check valve on the return line. Its a problem waiting to happen.

Add separate gate/ball valves to each return, then drill a small hole in the lock line and you will be plenty safe to prevent any siphon.
 

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 40 58.8%
  • Automated dosing

    Votes: 5 7.4%
  • Mechanical filtration / roller filter

    Votes: 4 5.9%
  • Automated water testing

    Votes: 3 4.4%
  • Automatic feeding

    Votes: 0 0.0%
  • Lighting schedule

    Votes: 9 13.2%
  • Controller and remote monitoring

    Votes: 3 4.4%
  • Leak detection and emergency shutoff

    Votes: 1 1.5%
  • Automatic water changes

    Votes: 2 2.9%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.5%
Back
Top
Home
Post thread…
Market
What's new