2 part dosing amounts

  • Thread starter Thread starter SeeFu
  • Start date Start date
  • Tagged users Tagged users None

SeeFu

Well-Known Member
View Badges
Joined
Apr 21, 2019
Messages
979
Reaction score
246
What state or country do you live in
California
Rating - 0%
0   0   0
Am I supposed to be dosing both CA and ALK in the same volume? I need to dose around 20ml of ALK to maintain 8 dkh, but my CA remains at 420 w/o me dosing any CA.
 
How old is your tank?
 
system is about 9 months old.
 
What product are you using? For example ESV suggests dosing in equal parts. So once I got my Alk to the desired target, I started dosing both Alk and Ca in equal parts. There‘s a much lengthier discussion and a calculator for the optimal balance between the two. But what I’m seeing is that when my Alk is 8.6 my Ca runs at 450. I don’t think it’s optimal but everyone said to follow the directions.

At the end of the day there is an optimal balance between Alk and Ca. Look for a calculator at hamzasreef.com that will tell you the right Ca for a given Alk level. I suppose you could target that.
 
FWIW, not all two parts are properly designed for 1:1 dosing, even some that claim it. Some do not even try (oddly, IMO)

Am I supposed to be dosing both CA and ALK in the same volume? I need to dose around 20ml of ALK to maintain 8 dkh, but my CA remains at 420 w/o me dosing any CA.

It is fine to dose both equally, and calcium will still probably still stay stable. I do not know your tank volume, but say it is 50 gallons water volume. 20 mL of a typical two part is only about 0.6 dKH per day. The balanced amount of calcium demand is only about 4 ppm. With a hobby kit, you won't reliably detect that for a while, and when you do, you will suddenly realize that you need to add about as much to get batch to your target as if you matched 1:1 all along.

That said, if you want to not dose the calcium part for a bit, that's OK. Since your demand is quite low, it is possible water changes with a higher calcium mix might help calcium. But still, using the two part as 1:1 directed won't cause a problem.
 
But what I’m seeing is that when my Alk is 8.6 my Ca runs at 450. I don’t think it’s optimal but everyone said to follow the directions.

Those values are fine, and IMO, there is no importance to the ratio. Target both to desirable ranges. Exact calcium values have little import in the 400-550 ppm range.
 
thanks, i guess i'll start dosing 20ml of CA and see what happens over the next week.
 
wow strangest thing happened. i started to dose 20ml of CA and the CA levels dropped in my tank. so i upped it to 30ml and then 40ml and the amount of CA measured kept dropping. the hecks going on. lol
 
wow strangest thing happened. i started to dose 20ml of CA and the CA levels dropped in my tank. so i upped it to 30ml and then 40ml and the amount of CA measured kept dropping. the hecks going on. lol

More info needed. I cannot tell what time frame you are talking about, and the absolute calcium values would be useful to know. Are you also dosing alkalinity?
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.0%
  • I decorate AROUND the tank or stand

    Votes: 4 16.0%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 16 64.0%
  • We don’t decorate for the holidays

    Votes: 4 16.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new