3lusive's Inverted Nano in 90

3lusive

Active Member
View Badges
Joined
May 23, 2014
Messages
412
Reaction score
478
Location
Fort Worth, TX
What state or country do you live in
Texas
Rating - 0%
0   0   0
Equipment :

glass box : 2.5g AGA
lighting : Nano-Box Mini Tide
heat : Cobalt 50w NeoTherm
flow : Mini Jet 606

Stocking plans :

assorted inverts
zoas
mushrooms
SPS or 3

Crappy Cell Pics :


​excuse the messy desk please... thanks
 
Should be getting the rock(s), and a tiny bit of sand today. Hopefully I will have this thing ready to go by tonight, then it will be on cruise control until we start. That should give it plenty of time to settle in .
 
Glad to have you in the contest and looking forward to following your progress!
 
Cool looking forward!
 
thanks guys, this little guy is turning out to be a challenge already. Real estate is very limited so even a small piece of rock looks like a mountain. Lol

I have a backup plan though, Hopefully that will open up a little space.
 
so I didn't like giving up the real estate for the AIO section, so I pulled that out and drilled the tank. Some of the equipment has changed as well.
Flow : quiet one 1200 (dialed back) feeding a SCWD , that provides flow from each side of the tank.

I made a filtration section that will be hidden behind the tank along with the pump and SCWD. I hope to have pics and video up once the test runs are over.
 
drilling the tank today. I have decided to run an external pump with the returns coming from each end of the tank. this will allow me to use the entire footprint of what is already a cramped space. the returns will be fed through a SCWD to create alternating currents, this seemed to be the best option for keeping most of the equipment out of the display. the SCWD, and pump will both be hidden behind the tank for a clean look.


hopefully I don't break the tank.
 
2 down , 1 to go .

:)
 

Attachments

  • 1402706890273.jpg
    1402706890273.jpg
    46.9 KB · Views: 383
Oh I'm not giving up that easy.

I was connecting the plumbing and it seems that I put too much stress on the bulkhead and the back glass popped.

Will pick up another tank this week .
 

TOP 10 Trending Threads

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 8 24.2%
  • Powerheads or wavemakers

    Votes: 3 9.1%
  • Sump or rear filtration chambers

    Votes: 5 15.2%
  • Skimmer or other filtration equipment

    Votes: 2 6.1%
  • Overflow or plumbing

    Votes: 7 21.2%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 7 21.2%
  • Other—tell us what I missed

    Votes: 1 3.0%
Back
Top
Home
Post thread…
Market
What's new