400 watt is it to much?

  • Thread starter Thread starter rareform
  • Start date Start date
  • Tagged users Tagged users None

rareform

New Member
View Badges
Joined
Dec 3, 2009
Messages
7
Reaction score
6
Location
california
Rating - 0%
0   0   0
I have a 24" deep tank and I changed from a 20k to a 14k 400 watt buld and it is bleaching thing so I was thinking my be 250 watt would not be so intense am I looking at this right?
 
I think you would be better with 250. I have a 30" deep tank and that's what I use with no problems. For SPS, just keep at mid-level or higher.
 
The change in kelvin rating and possibly PAR is what caused bleaching. You have to acclimate corals to change like this by greatly reducing photoperiod to only a couple/few hours per day for a couple weeks and slowly increase it.

What wattage bulbs you're going to run depends on your set-up... what's the footprint, how high off the tank are the lights, and what type of reflector/ballast/bulb (SE/DE) are you using?

Coudl you just use 250s? Sure, but you could also just use 175s or 150s or 400s or... it all depends on your set up.
 

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 56 57.1%
  • Automated dosing

    Votes: 6 6.1%
  • Mechanical filtration / roller filter

    Votes: 4 4.1%
  • Automated water testing

    Votes: 3 3.1%
  • Automatic feeding

    Votes: 1 1.0%
  • Lighting schedule

    Votes: 19 19.4%
  • Controller and remote monitoring

    Votes: 4 4.1%
  • Leak detection and emergency shutoff

    Votes: 1 1.0%
  • Automatic water changes

    Votes: 3 3.1%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.0%
Back
Top
Home
Post thread…
Market
What's new