55 Gallon Sump Build

vancity.tropicals

New Member
View Badges
Joined
Dec 24, 2025
Messages
12
Reaction score
17
Location
Surrey, BC
What state or country do you live in
Canada
Rating - 0%
0   0   0
Hi guys,

I’m building a sump for my 180 Gallon Bowfront African cichlid tank, and I know it’s freshwater but I also know saltwater guys are the sump gurus.

I can fit a 55 gallon tank under my stand, and so I’m wondering if a 20 gallon long sump baffle kit will work for my 55 gallon tank. I don’t plan on running anything crazy in the sump.
 
I don't think they have the same internal width. I think the 55 is 12" inside and the 20L is only 11.75" if I remember. It's been a long time since I looked at standard all-glass or similar dimensions.
 
Hi guys,

I’m building a sump for my 180 Gallon Bowfront African cichlid tank, and I know it’s freshwater but I also know saltwater guys are the sump gurus.

I can fit a 55 gallon tank under my stand, and so I’m wondering if a 20 gallon long sump baffle kit will work for my 55 gallon tank. I don’t plan on running anything crazy in the sump.
I seem to recall that cast acrylic does expand up to 3% when immersed in water, even more for extruded… as @BeanAnimal noted, the fitment of the sump baffles would actually be quite important here, and is worth some careful scrutiny!

(There are a few threads kicking around here of tightly fitted DIY acrylic sump baffles or AIO dividers either starting to peel the glass tank in question apart at its seams, or outright shattering it weeks after filling!)
 
I seem to recall that cast acrylic does expand up to 3% when immersed in water, even more for extruded… as @BeanAnimal noted, the fitment of the sump baffles would actually be quite important here, and is worth some careful scrutiny!

(There are a few threads kicking around here of tightly fitted DIY acrylic sump baffles or AIO dividers either starting to peel the glass tank in question apart at its seams, or outright shattering it weeks after filling!)
What would you and @BeanAnimal recommend I do then? I have 5ft x 15inches x 22 inches of space under my stand. So I think only a 55 gallon would fit as a sump. Should I make my own baffles? How should I go about that? I’m on a tighter budget.
 
Is this the total height inside the stand? Or is this the maximum sump height before you cannot get arms/equipment in there?
The total height is around 26". At 22", I can still move my arms in. Won't be much equipment other than a UV sterilizer, heater, and return pump.
 
The total height is around 26". At 22", I can still move my arms in. Won't be much equipment other than a UV sterilizer, heater, and return pump.
That helps. You don’t need baffles. Just an auto top off to keep water level consistent and a container of some kind can act as a bubble trap for the incoming water.
 
Following along!
 
That helps. You don’t need baffles. Just an auto top off to keep water level consistent and a container of some kind can act as a bubble trap for the incoming water.
I want to add filter socks and have my filter media in the the sump. Also I want to run a herbie overflow system so I can run it super quiet. Do I need more than one drain?
 
I want to add filter socks and have my filter media in the the sump. Also I want to run a herbie overflow system so I can run it super quiet. Do I need more than one drain?
Yes, I would use at least two drains (Herbie), even for freshwater.

You don't need much in your sump tank for a freshwater system. Microbubbles are not really a problem in freshwater tanks, so no bubble trap is needed.

An Auto Top Off system (ATO) would be nice to prevent the water level in the sump from dropping dangerously low for the return pump, but if you top up regularly, no ATO is needed in freshwater system. Obviously, keeping a stable salinity is not important in freshwater, the way it is in saltwater tanks (which is the first reason most people use an ATO).

Strictly speaking you don't need baffles in your sump, though they can be helpful.

I might suggest a simple clamp on holder for a filter sock, and I might get a smaller pump for inside the sump that feeds a simple media reactor that holds any chemical medias you may need, such as carbon. This small pump and reactor could circulate inside the sump, so no extra gear in your display. Your heater would go in the sump as well.

Good luck with your Cichlid tank!
 
For inspiration, Here’s how I baffled out my old 75G sump when I restarted my 180G freshwater Amazon river tank:

IMG_5734.jpeg


It flows from right to left; drain chamber, refugium chamber, return chamber…

I run mechanical filtration as-needed only, a 1”thick block of 20PPI foam between baffles, and/or filter socks… the center refugium chamber is just a 1.5’x1.5’x2’ lump of Java moss, which I rip apart every 5-6 weeks to discard half of…

IMG_3716.jpeg


And yes, sump to sump UV plumbing definitely works for on-demand water clarity improvement with this arrangement!
 
Hi guys,

I’m building a sump for my 180 Gallon Bowfront African cichlid tank, and I know it’s freshwater but I also know saltwater guys are the sump gurus.

I can fit a 55 gallon tank under my stand, and so I’m wondering if a 20 gallon long sump baffle kit will work for my 55 gallon tank. I don’t plan on running anything crazy in the sump.
I had a cichlid 75 gallon . Long story short they all died from Malawi Bloat because of my ignorance , and taking advice from my LFS rep when my regular food was discontinued . I contained fish meal . Anyway when I broke down the Tank the gravel was filthy ( black ) even though I siphon cleaned it every week. So I wonder what an undergravel reverse flow filter system would do for you. I am staying out of the sump discussion , you have the two best advisers already
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 11 37.9%
  • I’d trust someone who knows my tank to choose

    Votes: 0 0.0%
  • I’d rather get a gift card and pick it myself

    Votes: 10 34.5%
  • I’d prefer gear or supplies instead

    Votes: 0 0.0%
  • Please don’t surprise me with livestock

    Votes: 8 27.6%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new