One question, can you check both controllers for what firmware they are on? Its a long shot, but we did have an older glitchy firmware. This could be solved by updating to 1.4.2, you do this under system for each pump
7020 controller question
- Thread starter RobertK
- Start date
- Tagged users None
OP
OP
OK Roger so I did a hard reset on both controllers, reconnected them to the hub, and everything seems to be working now. I guess they just needed a hard reset! In cloud mode both pumps now turn off when the food timer button on either controller is pushed. In leader/follower mode I do have to push the food timer button on both controllers but that is no big deal. I think I'll keep it in cloud mode anyway now that it is working properly.
But Roger I have another question - is there an instruction manual for all the settings in the Tunze Hub? If not there should be! The instruction manual that came with the 6105 Eco has detailed instructions on how to configure the 7020 controller, and how to connect the controller to the hub, but nothing about how to use the hub once you're connected to it. I did watch your YouTube video and that was helpful, but there are still some things I don't understand and a user guide for the Tunze Hub would be super helpful.
Thanks again for your help!
But Roger I have another question - is there an instruction manual for all the settings in the Tunze Hub? If not there should be! The instruction manual that came with the 6105 Eco has detailed instructions on how to configure the 7020 controller, and how to connect the controller to the hub, but nothing about how to use the hub once you're connected to it. I did watch your YouTube video and that was helpful, but there are still some things I don't understand and a user guide for the Tunze Hub would be super helpful.
Thanks again for your help!
Similar threads
