8 weeks Cycling with FX6 Canister Question

  • Thread starter Thread starter DCBadger
  • Start date Start date
  • Tagged users Tagged users None

DCBadger

New Member
View Badges
Joined
May 6, 2025
Messages
5
Reaction score
1
Location
Springfield
What state or country do you live in
Virginia
Rating - 0%
0   0   0
New to the hobby and in need of some assistance. Have seen parts of this discussed in different threads but not fully.

The setup:
- FX6 canister on a 125g tank
- Currently only foam on the outside trays, ceramic rings and layer of bio foam
- Started with 60% live rock. 40% dry
- Started with Aragonite "live" sand
- Planning of FOWLR tank
- Adding HOB protein skimmer later
- We are 8 weeks of cycling
- Seem to have hydroids recently pop up on the glass along with potential bladder snail

Nitrites (.25only)still register after dosing with 1ppm Ammonia after 24hrs. This has been the case for 3 weeks now. However, generally Ammonia hits 0 although this week after 24hrs it registered .25 oddly. Nitrates are always around 20ppm.

Are there any recommendations what we should do or just continue to be patient? We contemplated a small WC.

Lastly, we have an old eheim canister. Would it be beneficial to fill that canister with rubble or is that overkill?

Thank you
 
Are you using an API test? They are known for constantly showing .25 for ammonia or nitrite, you'll wait months for it to drop to zero. If you have some measureable nitrates, then disreagrd the .25
 
New to the hobby and in need of some assistance. Have seen parts of this discussed in different threads but not fully.

The setup:
- FX6 canister on a 125g tank
- Currently only foam on the outside trays, ceramic rings and layer of bio foam
- Started with 60% live rock. 40% dry
- Started with Aragonite "live" sand
- Planning of FOWLR tank
- Adding HOB protein skimmer later
- We are 8 weeks of cycling
- Seem to have hydroids recently pop up on the glass along with potential bladder snail

Nitrites (.25only)still register after dosing with 1ppm Ammonia after 24hrs. This has been the case for 3 weeks now. However, generally Ammonia hits 0 although this week after 24hrs it registered .25 oddly. Nitrates are always around 20ppm.

Are there any recommendations what we should do or just continue to be patient? We contemplated a small WC.

Lastly, we have an old eheim canister. Would it be beneficial to fill that canister with rubble or is that overkill?

Thank you
I think you are good. I have no idea how you can read such a small reading I would love to see a pic, and also whose kit
 
Are you using an API test? They are known for constantly showing .25 for ammonia or nitrite, you'll wait months for it to drop to zero. If you have some measureable nitrates, then disreagrd the .25
I know Salifert kits are way more expensive but the syringe is way better for getting proper amounts since plunger is flat. I would bet API would give better readings using them
 
If you used 60% actual live rock I would expect your good. Have you tested nitrate? Personally i don't own an ammonia or nitrite test kit. When I see nitrate present i slowly move forward. Not a recommendation its just how I do it.
Yeah, sporadically have tested nitrate and seems to always read 20ppm
 
I know Salifert kits are way more expensive but the syringe is way better for getting proper amounts since plunger is flat. I would bet API would give better readings using them
We have been using API. Just found it odd that randomly got the .25 reading when all the other times been showing 0.
 
Yeah, sporadically have tested nitrate and seems to always read 20ppm
I far from an expert and what I've read says nitrite can skew nitrate test results but I figure if I'm seeing nitrate I'm processing ammonia so I start moving forward slowly.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new