Advice on coral death.

  • Thread starter Thread starter Jblunkall
  • Start date Start date
  • Tagged users Tagged users None

Jblunkall

Active Member
View Badges
Joined
Mar 29, 2014
Messages
290
Reaction score
121
Location
Lebanon Tennessee
Rating - 0%
0   0   0
So I have 2 tanks running separately. I have recently had a torch head die in one and a torch head and 2 heads of frogspawn die in the other. I do water changes about every 3 weeks. All testing checks out but my alk is at about 9.5 after the water changes and about 6 before the water change. Would this alk swing cause death? (I have dosers and 2 part just haven't hooked them up). Also the frogspawn heads just kind of popped off. The tentacles with the mouth is still in the tank just laying on the bare bottom of the tank. The torch ended up brown jelly. Thanks for the input. I have a good amount of euphyllia and don't want this to be a epidemic and lose more. I tried searching the forums but still trying to figure the site out.
 
f61d2e96f35fdbb46093019b66ba955d.jpg
 
Yeah, that's quite the swing. I would look into getting those dosers going. Euphalia will perform a "polyp bailout" when stressed in hopes of staying alive. This recently happened to @schooleyosis with one of his torches.

Brown jelly can spread and needs to be rectified if possible. I lost about ten heads of torch in less than a week due to BJD.
 
Alkalinity of 6 dkh can definitely be the cause. Swinging up to 9.5 probably doesn't help matters. I'd definitely get the doser going asap. Good luck
 
Big swings of any parameter in a good or bad direction are rarely if ever good. Consistency and stability are of utmost importance.
 
To reiterate the above, my torches absolutely hate alk swings and I've seen polyp bail out from this issue. With a stable alk(and other params) you'll be surprised how well the euphyillas respond!
 
Never had polyp bailout myself but I guess I should be thankful for that. You will want to keep the alk up like others have said with the dosing AND maybe see what the alk of your salt mix is. Some can be very high. In that case you might try a different mix as well. Just another thought FWIW.
 
Not sure what happened to mine but it looked like someone took a 1/4" drill bit and drilled right down the center of them. Noticed that after they brown jellied...
 
Goal for happy corals is to have your parameters remain stable. Manually dose your tank daily, weekly whatever you need to do to stop the swings. If you can't do that then at least bump your water changes to weekly.
 
So I started water changes weekly. Think I have stopped the bleeding.
Ok so I wanted to see out of the people that have seen polyp bailout, has anyone had the polyps live for an extended period of time? Going on 2 weeks and I have 2 heads of hammer still living. I put them in a bowl in the tank so they wouldn't just fly all over the tank and they are doing well. I didn't expect them to live and maybe they are dying and I'm just hoping. Anyone else had experience with this? And what are the chances of the polyps living away from the skeleton?
 
Euphyllia will propagate by dropping polyps like that. I had a Frogspawn years ago that popped off the main colony and eventually grew into a colony itself . Maybe this is what happened here?
 
I would add a piece of rock rubble with the hammer to try and give it something to grab a hold of.
 

TOP 10 Trending Threads

WHAT MOST EARNS A REEFING BUSINESS YOUR "BEST OF THE BEST" NOMINATION?

  • Excellent livestock or product quality

    Votes: 4 17.4%
  • Honest listings and accurate expectations

    Votes: 2 8.7%
  • Helpful, knowledgeable customer service

    Votes: 1 4.3%
  • Standing behind a product when something goes wrong

    Votes: 6 26.1%
  • Fair prices and good value

    Votes: 5 21.7%
  • A unique selection or innovative products

    Votes: 0 0.0%
  • Supporting the reefing community or sustainability

    Votes: 0 0.0%
  • Consistent quality over time

    Votes: 4 17.4%
  • Other (Post in the comments)

    Votes: 1 4.3%
Back
Top
Home
Post thread…
Market
What's new