Alk

  • Thread starter Thread starter courtstig
  • Start date Start date
  • Tagged users Tagged users None

courtstig

Community Member
View Badges
Joined
Jul 11, 2021
Messages
69
Reaction score
43
Location
02889
What state or country do you live in
Rhode Island
Rating - 0%
0   0   0
Hi I have been checking my parameters every week for about a month and my alkalinity keeps dropping .calcium is sky high and so is magnesium ph is 8. Any help is appreciated
 
Are you dosing anything? What salt do you use? What are the levels? What test kits?
 
Not dosing, fritz blue box salt, alk has been around 8 now it’s a bit lower ,calcium and magnesium are off the charts ,salifert test kits salinity is 1026
 
Alkalinity is the thing most people have to dose the most frequently. I keep mine around 8 btw.
 
What do you use?
For small changes simple baking soda can be used. For long term check into BRS 2 part or something similar. Calculators can be found on the BRS site.
 
Try testing your newly mixed saltwater. I started with fritz but switched to Red Sea after getting some bad batches of salt, meaning it mixed at 1.026 salinity to terribly high or low alk, calc, mag parameters. Your salt could be your problem.

Other than that, think of alkalinity as a measure of how easily your corals can consume calcium to grow. Think of balanced alk at 8.5, so low alk will prevent corals from consuming calcium making calcium go up. High alkalinity increases their consumption, which drops calcium relative to alk.

there are lots of methods of dosing, most people use 2 part (soda ash for alk and calcium carbonate for calcium). BRS is the cheapest.
 
Not dosing, fritz blue box salt, alk has been around 8 now it’s a bit lower ,calcium and magnesium are off the charts ,salifert test kits salinity is 1026

That seems a bit weird on calcium and alk. Maybe give the salt bags a bit of a shake before you mix next time.


Dosing alk is pretty common. It is not unsual for a tank to consume 1 or 2 KH a day
 
It would be more useful to see the actual calcium. "Sky high" may be fine.

Use a second syringe of titrant if needed, and add the two values together.
 
Was around 500 started dosing just part 2 of reef fusion yesterday got alk up to 10. Was down to 9 today and calcium is down to 450. I guess I’m going to have to start figuring out how much to dose
 
Was around 500 started dosing just part 2 of reef fusion yesterday got alk up to 10. Was down to 9 today and calcium is down to 450. I guess I’m going to have to start figuring out how much to dose

Unless you are intentionally aiming to keep a high alk tank, I wouldn't dose alk or calcium at those levels.

These may be helpful, although the nitrate an phosphate recommendations are dated and should be higher

https://www.reef2reef.com/threads/o...-reef-aquarium-by-randy-holmes-farley.173563/
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.3%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.8%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.1%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 11 11.8%
  • I keep a backup of everything

    Votes: 24 25.8%
  • Other (Post in the comments)

    Votes: 7 7.5%
Back
Top
Home
Post thread…
Market
What's new