Yes I did. I don’t think it’ll collapse on its own but I would still like to make it stronger. No risk.
Hi! Funny you mention this project, I just did this with my BC29 stock stand. I have a 2 yo and needed something to stand up to her antics. I found the stock stand very flimsy and short so I did the following:
1. Removed those little plastic feet and replaced them with furniture “bun” feet to add about 5 inches of height. The feet are attached with metal corner plates about 6 inches long on each axis (secured every 2 inches with screws into stand frame), which distributes the weight of the tank evenly over 4 heavy duty metal brackets instead of the dinky plastic nubs.
2. Removed the cardboard backing and added 3/4 inch plywood which extends to the exterior measurements of the stand. That way I could anchor all the walls to the back for increased stability.
3. I used 1-1/2 inch angle brackets and put 2 on each wall and attached the new back cover to the stand with them. They added a ton of stability. I was planning on adding some to the top of the stand inside in case it was necessary but with the new back and angle brackets, this thing is rock solid.
I had everyone I know sit, jump, rock, tumble, you name it, try to knock it over (some 300+ pounds). It’s been good so far! I’ve had my cube cycling for almost a week on it with no issues. My tank is in the living room on carpet so I placed 2 12x24 inch tiles under the tank for increased stability. Hope this gave you some ideas. Let me know if you want pics! ~Lindsey
