Apex Error

[Drauka99]

I havn't researched either very much (because i am waiting for the Neptune Trident) but from the readings I am pretty sure you could turn a doser on and off through the apex but the Jeabo dosers I have seen were setup for programming a timer like program on them. A simple dosing pump with only on and off would likely work better. You could however use the KH input into the Apex to turn off the Jeabo if something went out of wack

 

[MaddyP]

OK, thanks. Does the KH Guardian only work with the same brand dosers or can I make a Jebao doser work with it?

Only because I already have a Jebao running on my tank

https://www.reef2reef.com/threads/kh-guardian-automatic-alkalinity-controller-my-experiences.288011/

 

[Dan Cyr]

Hmm....wonder if the slave Jebao would work [emoji848]

 

[Samina]

Hey, yes it is a KH Guardian. It’s a standalone Alk controller that tests Alk and doses Sodium Bicarbonate. I have it hooked up to a PM1 and then to the Apex. This allows me to be able to set up other things if my dKH reading is too high or low and so forth. And yes you can utilize a doser in the same manner as well. Just program your dosing instructions based off of the captured results. It has been very accurate for me thus far.

 

[Dan Cyr]

Hey, yes it is a KH Guardian. It’s a standalone Alk controller that tests Alk and doses Sodium Bicarbonate. I have it hooked up to a PM1 and then to the Apex. This allows me to be able to set up other things if my dKH reading is too high or low and so forth. And yes you can utilize a doser in the same manner as well. Just program your dosing instructions based off of the captured results. It has been very accurate for me thus far.

Thank you very much!!