Apex won't stop emailing me!!!!

[Lil' RegalReefster]

HI, a few months back I got my first apex (Entry Level). I learned to program it through various tutorials and set up a few alarms, however, I had to turn them off since I was cycling my tank with raised temperatures and didn't want emails that my tmp was too high. My cycle just finished yesterday so I lowered my temperature back to normal, put my heaters on auto and turned my alarms back on. About 3 hours later I started receiving emails and alarms in 1-hour intervals from apex fusion saying. Did I program something wrong or am I missing something please help!

Status: ON

Statement: Alarm is off

Date: 2020-10-01 08:52:03 -0700

 

[((FORDTECH))]

Log into your fusion and click the bell in top left corner then click the event it pulls up and post that here. It should show why alarm is on. From that point we correct it

 

[BighohoReef]

I had this issue and found the resolution in the guide below, there is something that probably isn't configured right in your code alerts. Post the code if you can get to it in fusion.

https://www.reef2reef.com/ams/apex-programming-command-reference.771/

 

[((FORDTECH))]

HI, a few months back I got my first apex (Entry Level). I learned to program it through various tutorials and set up a few alarms, however, I had to turn them off since I was cycling my tank with raised temperatures and didn't want emails that my tmp was too high. My cycle just finished yesterday so I lowered my temperature back to normal, put my heaters on auto and turned my alarms back on. About 3 hours later I started receiving emails and alarms in 1-hour intervals from apex fusion saying. Did I program something wrong or am I missing something please help!

Status: ON

Statement: Alarm is off

Date: 2020-10-01 08:52:03 -0700

Click the settings button on the email switch and post what is in there. Also that email switch needs to be in the auto position So it will follow the code that is written for it

 

[SuncrestReef]

You said you "turned my alarms back on". Does that mean you set the EmailAlm slider to "ON"? If so, that's the reason you're getting hourly notifications. Instead, the slider needs to be set to AUTO so the programming actually controls when it's On or Off.

See my tutorial on Apex Alarm Programming for more details and tips to optimize your alarms: https://www.reef2reef.com/ams/neptune-apex-programming-tutorials-part-6-alarms.707/

 

[Lil' RegalReefster]

oops. a big mistake, I set my email alarm to on not auto. Noob mistake, thx everybody who helped me.

 

[((FORDTECH))]

oops. a big mistake, I set my email alarm to on not auto. Noob mistake, thx everybody who helped me.

Lol well at least it’s fixed. That was an easy one :)