Aquarium stand question

Unstoppable algae!

Active Member
View Badges
Joined
Sep 3, 2018
Messages
178
Reaction score
86
Rating - 0%
0   0   0
Setting up a used aquarium and noticed the stand settled a little bit. On the right side I can see an air gap between the tank and stand.
Should I put a leveling mat or thin wood sheet in between tank and stand?

My google search said the tanks with trim around top & bottom don’t need anything additional but wanted 2nd options. Thanks all!
 
IMG_2517.jpeg
 

Attachments

  • IMG_2516.jpeg
    IMG_2516.jpeg
    171.4 KB · Views: 33
Bump, should I put a leveling mat under this tank? Any thoughts

(Did I post this in the wrong spot?)
 
A tank with plastic trim on the bottom should not have a mat under the tank.

Is the stand stable to support the tank with water in it? Does it have any movement? If no, I would place a board on top of the stand(with a shim where there is a gap).
 
Woodworker here. Looks like some good wood swelling has happened at some point. You definitely have a high spot somewhere to the left of the gap. Put a piece of confirmed flat plywood on top and check with a level. You should be able to sand it down much closer to level. You don't need to have it "machined quality level for a rimmed tank but I would defiantly try to level it better before setting it up semi permanently. SHould be a simple fix if you are patient and take your time.
 

TOP 10 Trending Threads

Back
Top
Home
Post thread…
Market
What's new