Bad idea or really bad idea? Reinforcing floating edge aquarium. . .

  • Thread starter Thread starter MoshJosh
  • Start date Start date
  • Tagged users Tagged users None

MoshJosh

2500 Club Member
View Badges
Joined
Jan 27, 2022
Messages
4,543
Reaction score
4,804
Location
Grand Junction
What state or country do you live in
Colorado
Rating - 100%
1   0   0
So I bought this aquarium second hand, only ever had one owner and is only 8 months old. I have no reason to think it will leak or fail, as I have seen no reports of this happening online, but it does have a floating edge much like those Red Sea Reefers that failed. . . So now I've worked myself up into a panic thinking I should reinforce it somehow. . . And I've been going down a rabbit hole trying to figure out the best way of doing this, and doing it in such a way that does not require removing the existing silicone (possibly weakening it). I looked at getting some custom glass pieces cut but local shop couldnt really help me out with the size and thickness I was looking for. . . So then I thought "what could I buy at Home Depot". . . And I found these tile trim pieces that could further secure the side panels to the bottom by extending past the existing silicone. . .

Is glazed ceramic reef safe? Internet seems to think yes with caution, maybe. . . Will silicone stick to these as well as glass? I'm testing that. . . Will the tile degrade overtime underwater? I don't think so. . . Would this ACTUALLY add any strength????

I probably sound crazy but this is what I've been up to today. . .

Also tank is Fluval Siena 72 gallon. Previous owner removed the decorative tape from the top and I removed it from the bottom (Fluval themselves call this decorative, and it was literally tape) and there was never a rim.

20251208_161303.jpg

20251208_161307.jpg


OR I could just cut a piece of 3/4 marine ply and put it under the tank haha
 
Last edited:
IMO, conceptually a good idea. I just used 1" acrylic triangles on my RS 525XL on each corner, siliconed in. I would replace the tile with 1" acrylic square rod....(or even just glass)
 
I would fully support the whole tank and not do the tile but looks like you already did. Tile might not be safe for fish or corals...who knows. That glass looks awful thin for a tank that size to me...72 gallon
 
Last edited:
I would use glass strips. I would be afraid that the ceramic tile could swell if you siliconed it in place. Placing stress on the glass panel and causing the tank panels to separate.
 
why are tank manufactures even making stand that dont fit the tanks now lol
im guesssing if im understanding it this isnt the stand for the tank and your worried it over hangs??
 
The picture you sent with the glass aquarium looks like just 2 pcs of glass like a L. Not a full box. You are probably showing a prototype of why you are going to do? So the glass of your aquarium would be thicker I guess ?
 
The picture you sent with the glass aquarium looks like just 2 pcs of glass like a L. Not a full box. You are probably showing a prototype of why you are going to do? So the glass of your aquarium would be thicker I guess ?
Yeah that was a test piece.
 
If anyone was curious, the silicone stuck very well to both the glazed and unglazed portions of the tile. I could not pull the tile off in either orientation with my bare hands, nor did bending the pieces of glass together a full 90 degrees. The silicone did partially fail when I did the later, but that is likey due to the fact it only cured for 24 hours as it remained stuck to both the tile and the glass but failed in the middle and was slightly tacky to the touch. . .

20251209_161643.jpg
20251209_161718.jpg
 
If anyone was curious, the silicone stuck very well to both the glazed and unglazed portions of the tile. I could not pull the tile off in either orientation with my bare hands, nor did bending the pieces of glass together a full 90 degrees. The silicone did partially fail when I did the later, but that is likey due to the fact it only cured for 24 hours as it remained stuck to both the tile and the glass but failed in the middle and was slightly tacky to the touch. . .

20251209_161643.jpg
20251209_161718.jpg
I don't know, I kinda want to try this haha seems like it could only add strength? I mean who knows if there are truly reef safe but I have found anecdotes of reefers using white glazed tiles without issue, and one reefer insisted that the glaze on white tile is just glass??? Hmmmmmm

I guess if they expand when wet that could be an issue? But how much could they possibly expand, plus if I put them in the convex orientation the expansion force would be pushing mostly against unsupported silicone and would be pushing the front upward which would be good right?

I don't know, tempted. . .
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 28.8%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.0%
  • I’d rather get a gift card and pick it myself

    Votes: 24 36.4%
  • I’d prefer gear or supplies instead

    Votes: 2 3.0%
  • Please don’t surprise me with livestock

    Votes: 19 28.8%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new