Maybe this?Randy, since oxygen levels are being discussed, and are something we should be aware of, are there any hobby grade monitors for O2 in our tanks?
https://www.saltwateraquarium.com/used-mw600-dissolved-oxygen-meter-milwaukee-instruments/
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Maybe this?Randy, since oxygen levels are being discussed, and are something we should be aware of, are there any hobby grade monitors for O2 in our tanks?
I have a rimless 120 tall planet tank, with a custom acrylic/mesh top. I also have icecap 4k gyres at each end causing surface agitation so I’m not very concerned about lack of O2How are you oxygen levels. Any concerns based on what randy indicated?
i also added an icecap kalk stirrer fed by an ecotech versa pump….my ph never changed after adding it. I keep my alk around 8.5. My local fish guru who has all of this stuff down to a science, literally spouts off mathematical equations to figure all of this stuff out, told me I needed a whole house air exchanger to bring my co2 levels down…i figured $50 worth of equipment and media was a more financially safe bet before throwing 1600-2000 worth of hvac upgrades at it!Almost all reefers say that, and almost all reefers have a pH change day to night that indicates incomplete CO2 exchange. Complete gas equilibration would cause no pH change day to night and pH would only track changes in the home air (and alk, if it did change).
So while it may be true that you have adequate O2 exchange, I do not think that reefers are generally successful at estimating gas exchange simply by looking at the system.
I exhaust the media really quickly (a few days) if the scrubber only drawn in ambient air. Now I set it up as recirculation, the same media can last for about 2 months.I dont know how you guys are getting your media to last so long (getting back to the OP question)
I have the BRS scrubber on my RSR350 (75g) and its pulling in air from outside. I set up a solenoid to run the OUTSIDE air through the scrubber for a few hours at night time...works great but in 2 days media is half exhausted! Im hearing people going weeks without replacement...how is this possible? Are there some longer lasting media out there?
This is the reason I dont like these, twice a week replacement will be too expensive and time consuming.
I’ve been up and running for bout a week and not seeing any color change in my media. Running a recirculating as wellI exhaust the media really quickly (a few days) if the scrubber only drawn in ambient air. Now I set it up as recirculation, the same media can last for about 2 months.
I draw in outside air and only scrub it for 7hrs a day, lasts about 4 days. This is nuts.I exhaust the media really quickly (a few days) if the scrubber only drawn in ambient air. Now I set it up as recirculation, the same media can last for about 2 months.
I should add more water when I fill it up all the way, that will have to be something else I experiment with.I fill up the reactor almost to the brim. I also pour in about half a cup of water to the bottom of the reactor. This ensures sufficient moisture is available to help with scrubbing.