Bubble Magnus Curve 9 Replacement Pump

[Breakthecycle2]

Does anyone have any recommendation for a Bubble Magnus Curve 9 replacement pump? Mine just DIED.

 

[cromag27]

Sicce psk1200.

 

[Breakthecycle2]

Sicce psk1200.

It will fit in the mounting bracket?

 

[cromag27]

Yes, with a slight modification. you'll need to cut down the four plastic "feet" on the pump. then it will slide into the locking bracket. I did this with my curve 5.

BTW, the pump is what separates the highly-rated seas side aquatics skimmers from the bm. once you replace the pump with a Sicce you basically have a ssa!

It will fit in the mounting bracket?

 

[Breakthecycle2]

Yes, with a slight modification. you'll need to cut down the four plastic "feet" on the pump. then it will slide into the locking bracket. I did this with my curve 5.

BTW, the pump is what separates the highly-rated seas side aquatics skimmers from the bm. once you replace the pump with a Sicce you basically have a ssa!

Thanks!

 

[cromag27]

No problem. I used a dreamer tool. when you pump the Sicce up next to the bracket you'll see how it needs to be cut down. you actually need to end up with flat tabs.