Burnt Tips and STN

spartanman22

Well-Known Member
View Badges
Joined
Oct 10, 2014
Messages
970
Reaction score
715
Rating - 0%
0   0   0
Hey all,

Wanted some advice. I’m seeing some burnt tips on a few acros, and recently my purple stylo colony has been slowly receding from the bottom up.

Tank is an 80 gallon AIO peninsula. Has been up and running for a year now and really hit a groove about a month ago, but running into some hiccups recently. I’ve attached photos of recent parameters. I find my parameters have been very consistent (not my first rodeo and I prioritize consistency over set points). Nitrates are low but have largely always been that way. My phosphates are elevated. I did confirm with Hanna that the trident is accurate, but my phosphates have largely been like this for months. I feed pretty varied diets and frequently. So I’m attributing phosphates to feeding. No real nuisance algae’s though.

Stock list is:

White tail bristle tooth
juvi Regal
Oreni tilefish
Clown pair
Six line
Melanurus
Multibar angel

I tried running some GFO in a filter bag to reduce the phos, and there does seem to be a correlation to adding fresh GFO and burnt tips on some acros. I removed the GFO over the weekend. There was no change in phos values so figured I’d just eliminate that variable. Alk doesn’t seem high enough to be causing burnt tips, but maybe in conjunction with the low nitrates? It’s only impacting certain pieces. Most acros are doing just fine. The purple stylo has been impacted the worst. It’s high up under 3 x Noo-Psyches peaking at about 35% (primarily white spectrum). This light schedule has been in place for roughly 6 months unchanged. The stylo is also right in front of my Orbit 4 so maybe too much flow?
20260902_095308_7A4B6919-DCBD-4CA1-ACB0-913028C14ED8.png
 
someone with more knowledge will chime in but i would guess your n:p ratio is off enough to cause some problems with some coral
 

TOP 10 Trending Threads

IF ONE SYSTEM FAILED WHILE YOU WERE AWAY, WHICH WOULD WORRY YOU MOST?

  • Power or backup power

    Votes: 10 28.6%
  • Heating or cooling

    Votes: 1 2.9%
  • Auto top-off

    Votes: 3 8.6%
  • Return pump or water circulation

    Votes: 3 8.6%
  • Dosing or automated testing

    Votes: 0 0.0%
  • Plumbing, overflow, or leaks

    Votes: 5 14.3%
  • Tank sitter or remote monitoring

    Votes: 1 2.9%
  • Electrical failure of some sort

    Votes: 0 0.0%
  • Seam or structure failure

    Votes: 9 25.7%
  • Something else (tell us in the comments)

    Votes: 3 8.6%

New Posts

Back
Top
Home
Post thread…
Market
What's new