Calcium reactor 5074

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Skibum

Active Member
View Badges
Joined
Apr 29, 2016
Messages
396
Reaction score
372
Rating - 0%
0   0   0
Hello @rvitko I just purchased a 5074 Calcium Dispenser. The plastic valve to prevent back flow was non-functional out of the box (did permit water through). Can I order a replacement from you or should I just go through the Tunze USA site?

-Tom
 

rvitko

Valuable Member
View Badges
Joined
Aug 20, 2012
Messages
1,823
Reaction score
1,181
Location
Austin, TX
Rating - 0%
0   0   0
Tom, just email me a copy of the receipt and I will send you one. We actually get those check valves from a US manufacturer, they are generally pretty reliable, there is an issue with the basic design that can lead to them clogging and jamming open but it has no easy solution. Momentarily the pressure on each side of the valve is equal and it does not close fast enough, if the check valve is not suspended above the bottle, it is highly likely powder will back up and jam the valve, but this is easily remedied by flushing it out with a syringe and a piece of airline tubing, if really caked up you can use vinegar and let it sit for a while. The innards are stainless and nitrile rubber.
 

High pressure shells: Do you look for signs of stress in the invertebrates in your reef tank?

  • I regularly look for signs of invertebrate stress in my reef tank.

    Votes: 42 31.6%
  • I occasionally look for signs of invertebrate stress in my reef tank.

    Votes: 30 22.6%
  • I rarely look for signs of invertebrate stress in my reef tank.

    Votes: 27 20.3%
  • I never look for signs of invertebrate stress in my reef tank.

    Votes: 34 25.6%
  • Other.

    Votes: 0 0.0%
Back
Top