Calcium Reactor Not Producing Bubbles????

[SpawnGawn]

Hey Guys

I need some help. I am trying to setup my new calcium reactor and everything is hooked up correctly, but there are no bubbles in the bubble counter. I have a korallin c1502 with reef fanatic Dual gauge CO2 regulator with solenoid and needle valve. They are brand new. I noticed on the solenoid that the light is on. If the light is on does that mean the its open or closed? Oh and the bottle is brand new. Can someone please help me on this?

Thank you

SG

 

[jelly]

take the line off the solenoid to see if there is co2 coming out of it.. whats the pressure readings on the gauges they might need to be adjusted if not high enough.. look to see if you have a check valve before or after the bubble counter. it could be on backwards. do you have a liquid in your counter tube?

 

[Reefing Madness]

 

[AZDesertRat]

Pictures?
jelly has some good troubleshooting tips to try.

You might also check out the instructions at the bottom of the page here that apply to most any calcium reactor:
Geo's Reef - Calcium Reactors

 

[bahamasmls]

take the line off the solenoid to see if there is co2 coming out of it.. whats the pressure readings on the gauges they might need to be adjusted if not high enough.. look to see if you have a check valve before or after the bubble counter. it could be on backwards. do you have a liquid in your counter tube?

Hi i know this post is old. Having the same issue. Yes there is water in air in the tube from solenoid to the bubble counter.