Calcium reactor secondary chamber

[lost66]

Does anyone know to plumb "T-X Sebcondary Media Chamber for Calcium Reactors - Aquamaxx"? There are 2 ports and I don't know which is input and which is output.

 

[vetteguy53081]

Does anyone know to plumb "T-X Sebcondary Media Chamber for Calcium Reactors - Aquamaxx"? There are 2 ports and I don't know which is input and which is output.

I’m not sure myself but aquamaxx website should have details and manual under “support “
Also likely on you tube

 

[sculpin01]

Either is fine but I would do bottom input, top output to automatically clear any built up gas.

 

[Crustaceon]

Typically, the bottom port is going to be the inlet which as mentioned, will allow any trapped C02 to be pushed out of the secondary chamber. This is how it works on my skimz reactor.

 

[lost66]

I’m not sure myself but aquamaxx website should have details and manual under “support “
Also likely on you tube

I think it used to be like that. Now, there is no such thing and I cannot find manual. There was no manual in the box I assume it is because it is super simple device

Thanks everyone, I connected it properly