Chiller recommendations

  • Thread starter Thread starter djbetterly
  • Start date Start date
  • Tagged users Tagged users None

djbetterly

Well-Known Member
View Badges
Joined
Sep 2, 2012
Messages
907
Reaction score
265
Location
Nutley, NJ (AKA - The Nut)
What state or country do you live in
New Jersey
Rating - 0%
0   0   0
I'd love to get some feedback on chillers. I'll probably go with either a 1/15 or 1/10, not sure yet.

I'm sure someone has an opinion on here and I'd love to here it!!
[emoji12]
 
Hi!
Post up your total volume and from there can give a good idea on cooling capacity :)
 
It also depends not only on volume, but how far down you want to cool. Are you only doing a couple degrees or 15 degrees. Big difference on which size you want.
 
Gee, I was about to make recommendations, except I just realized Current USA no longer has chillers? I have five or six 1/15, 1/10 and a 1/4 Currents and they are my favorite. Evidently they last a long LONG time, because hubby says they went out a nice while back. I have an AquaLogic 1/4 that is a work horse and currently have a 1/2 Active Aqua.
 
It also depends not only on volume, but how far down you want to cool. Are you only doing a couple degrees or 15 degrees. Big difference on which size you want.
That is determined by cooling capacity

Only a few degrees, on a bad day the temp never goes over 84.
For that volume I would do 1/10th
Don't cut yourself short as it may run all the time if too small.
Too big and it will cycle hard on the compressor.
 
Here is my thought on today's chillers
One of the biggest failures is the electronics.
Try to avoid chillers that use a control board for temperature presets.
 
I know with mine, I have had to change the fuse out once in 6 years. I would go with the 1/10th also. What blew mine was the pump feeding the water stopped and well, you can imagine that was not good on the chiller. :)

I know nothing about mechanical stuff. Hubby does that part. :) I just thought it mattered how much you wanted it to cool down as well as volume. I guess it does matter whether you are working it hard or every once in a while. Mine is almost constant in the summer and hardly on in the winter.
 
I know with mine, I have had to change the fuse out once in 6 years. I would go with the 1/10th also. What blew mine was the pump feeding the water stopped and well, you can imagine that was not good on the chiller. :)

I know nothing about mechanical stuff. Hubby does that part. :) I just thought it mattered how much you wanted it to cool down as well as volume. I guess it does matter whether you are working it hard or every once in a while. Mine is almost constant in the summer and hardly on in the winter.
Yes this leads to premature compressor failure. Cycling is hard on them.
(Retired electrician and hvac control tech)
 
I use a jbj 1/10 on a 60 cube plus 12g in sump. I live in the desert. Works great for me. I had the jbj 28 nanocube before this with mh and ran the 1/15
 
Seems like the most popular are aqua Euro, Teco and JBJ. The used JBJ I had burned out in 5 days. Left a bad taste in my mouth....doesn't mean they are bad of course.
 
Just looked a bit closer at the teco's, the one for me would be the TK-150...huge design flaw in my opinion, they put the power plug coming out the front. Now, I know for some that might not be a big deal, but for those of us who live in a apartment in Manhattan, that's kind of a big deal. I have no place to hide the chiller, so having a power plug coming out the front is essentially like having a power cord running across the floor. Its an eye-sore and a tripping hazard. Its a shame...
 
Did you see the Seachill line?
 
Yaaaaaa..... I saw the term Legacy, but I thought it was a fancy name. Hah! I would not be cool with that plug in the front. I agree... *****.
 

TOP 10 Trending Threads

WHAT MOST EARNS A REEFING BUSINESS YOUR "BEST OF THE BEST" NOMINATION?

  • Excellent livestock or product quality

    Votes: 15 28.3%
  • Honest listings and accurate expectations

    Votes: 7 13.2%
  • Helpful, knowledgeable customer service

    Votes: 4 7.5%
  • Standing behind a product when something goes wrong

    Votes: 12 22.6%
  • Fair prices and good value

    Votes: 7 13.2%
  • A unique selection or innovative products

    Votes: 0 0.0%
  • Supporting the reefing community or sustainability

    Votes: 0 0.0%
  • Consistent quality over time

    Votes: 7 13.2%
  • Other (Post in the comments)

    Votes: 1 1.9%
Back
Top
Home
Post thread…
Market
What's new