I've used a CO2 scrubber for about a year - It's worked perfectly delivering about a 0.20 pH increase. It's a simple media canister filled with a color changing version of soda lime (
BRS handles both the scrubbers and media now.) You simply connect it to your skimmer airline intake (it also makes a great silencer.) My system is only about 50 gallons total and I've yet to have to replace the color changing media. It's effectiveness depends on how much CO2 is present in the air surrounding the tank. In my case, my tanks are in a rather small living room with a fireplace that gets lots of use.
I was concerned that since the addition of the CO2 scrubber, my pH was perhaps trending too high (8.3-8.45 in late afternoon.) I stumbled across a couple of interesting relationship charts that came in handy. The first shows the balanced relationship between Alk and Ca. The second chart shows naturally occurring CO2 levels in NSW.
Alk meq/L Alk dKH Calcium ppm
0------------0-----------360
0.5----------1.4---------370
1------------2.8---------380
1.5----------4.2---------390
2------------5.6---------400
2.5----------7---------410
3------------8.4---------420
3.5----------9.8---------430
4------------11.2---------440
4.5----------12.6---------450
5------------14---------460
5.5----------15.4---------470
6------------16.8---------480
6.5----------18.2---------490
7------------19.6---------500
Ratio CO2 For ASW compared to NSW
VALUE IN CHART IS COMPARED TO A VALUE OF 1 FOR nsw AT SEALEVEL, OR x:1
Total Alkalinity (AT)
(mEq/l) . . . 2.0 .. 2.5 .. 2.6 .. 3.0 .. 3.5 .. 4.0 .. 4.5 .. 5.0 ... 5.5 ... 6.0
(dKH) . . . . 5.6 .. 7.0 .. 7.3 .. 8.4 .. 9.8 . 11.2 . 12.4 . 14.0 . 15.4 . 16.8
pH __________________________________________________ _________
7.7---------3.0 .. 3.7 .. 3.9 .. 4.5 .. 5.3 .. 6.0 .. 6.8 ... 7.5 ... 8.3 ... 9.1
7.8---------2.3 .. 2.9 .. 3.0 .. 3.5 .. 4.1 .. 4.7 .. 5.3 ... 5.8 ... 6.4 ... 7.0
7.9---------1.8 .. 2.2 .. 2.3 .. 2.7 .. 3.1 .. 3.6 .. 4.0 ... 4.5 ... 5.0 ... 5.4
8.0---------1.3 .. 1.7 .. 1.8 .. 2.0 .. 2.4 .. 2.7 .. 3.1 ... 3.4 ... 3.8 ... 4.1
8.1---------1.0 .. 1.3 .. 1.3 .. 1.6 .. 1.8 .. 2.1 .. 2.3 ... 2.6 ... 2.9 ... 3.1
8.2---------0.8 .. 1.0 .. 1.0 .. 1.2 .. 1.4 .. 1.7 .. 1.8 ... 2.0 ... 2.2 ... 2.4
8.3---------0.6 .. 0.7 .. 0.7 .. 0.7 .. 1.0 .. 1.2 .. 1.3 ... 1.5 ... 1.6 ... 1.8
8.4---------0.4 .. 0.5 .. 0.5 .. O.6 .. 0.7 .. 0.9 .. 1.0 ... 1.1 ... 1.2 ... 1.3
8.5---------0.3 .. O.4 .. 0.4 .. 0.5 .. 0.5 .. 0.6 .. 0.7 ... 0.8 ... 0.9 ... 0.9
8.6---------0.2 .. 0.3 .. 0.3 .. 0.3 .. 0.4 .. 0.4 .. 0.5 ... 0.6 ... 0.6 ... 0.7
__________________________________________________ ____________
Based on this data, and how my tank seems to run, it seems levels of pH 8.35 (8.25-8.40 Diurnal), 11.2 dKH and 440 Ca are about optimal. Obviously these are just targets and will fluctuate daily.