Connecting pvc to an eheim return pump?

snooked321 · May 12, 2015

The pvc fittings have diferent threads than what the pump has. Can someone
explain how they plumb pvc to the pump please? A few pics would help if ya have any. Thanks!

Usctom · May 12, 2015

Probably have metric threads. I have a jebao with the same issue. I used a short section of hose to connect the pump to the pvc. On the pvc end I used a barb fitting and the pump should have come with a barb fitting.

redfishbluefish · May 12, 2015

You didn't mention the eheim you have, but the larger ones (1260 and 1262) had the option of barb or 3/4 inch FPT.

If you go hard plumbing, I'd make sure to throw in a union to ease pulling the pump when you need to.

snooked321 · May 12, 2015

redfishbluefish said:
You didn't mention the eheim you have, but the larger ones (1260 and 1262) had the option of barb or 3/4 inch FPT.

If you go hard plumbing, I'd make sure to throw in a union to ease pulling the pump when you need to.

Yes that's the fitting I have with the 1262, Ill try a female adaptor on it. Thanks!