Coralvue hydros help

[kellermanx]

So I just got into the Coralvue Hydros system and new to all of this. But I’m wondering if anyone knows what lights are programmable with the hydros app.

 

[Jason_MrFrags]

more than just outlet on/off or 1-10v?

 

[JeffB418]

Hydros supports 2 types of lights, 1) simple off/on type. This is like a T5, Metal Halide, black box LED, or LED strips like reef brites where you plug the light into a Hydros AC outlet on an XP8 or Launch and just control the power schedule. Second type of light Hydros supports currently are 2) 0-10V controlled lights. These are lights were the main power source is always plugged into the wall but a 0-10V control signal from either a X4 or Wave Engine controls the brightness of the device. There are many of these out there, some older Kessils, Coralcares, Nicrew, and more. Hydros can control the dimming schedule of those lights.

 

[Arjun Pun]

What cable to use for connecting kessil 0-10v on hydros x4?

 

[JeffB418]

What cable to use for connecting kessil 0-10v on hydros x4?

Kessil 0-10V Control Interface

This tutorial explains how to use your Control 4 0-10V output port to control any Kessil light that has a 3.5MM photo control input that accepts 0-10V control. Any Kessil lights that use K-Link ports for control, can not be controlled by Hydros using this method. What you will need: - Control 4...

forum.coralvuehydros.com