Curve 5 bubble plate mod

[Alemoki]

Im pretty new here and see a lot of cool DIY projects flying around so I thought I'd post one of mine I recently did.

Saw some pictures of the JNS Skimmer (you will know it as aquamaxx) with its tiny acrylic cones and thought that would be a pretty simple mod for the Curve 5 on my setup so I went about designing a new one to print.

Here is what I got

This is it installed on the skimmer

 

[Brian1f1]

Have you noticed any difference?

 

[Alemoki]

Have you noticed any difference?

Well it seems to skim better but to be honest it didn't skim much before anyways coz I'm running fishless at the moment:(

Will let it run for a week or two more and get an idea of how it pulls and then put the old plate back and see what I get then.

I do believe it skims a bit better though.

Tryna upload a video of it in action

 

[Alemoki]

 

[Alemoki]

There it is!

 

[Brian1f1]

Cool! Keep us posted. I have a curve 5.

 

[Alemoki]

Definitely will!

 

[Simply__J]

Following.

So many questions!

Does it skim better?
Do you still run it at the same water level?
Does it reduce the issue with micro-bubbles?
Is it quieter?
How did you remove the old plate to install it?
Did you even remove the old play, or does it sit on top?
Plan on sharing the plans for this?
Are you selling them?

 

[Alemoki]

Following.

So many questions!

Does it skim better?
Do you still run it at the same water level?
Does it reduce the issue with micro-bubbles?
Is it quieter?
How did you remove the old plate to install it?
Did you even remove the old play, or does it sit on top?
Plan on sharing the plans for this?
Are you selling them?

I believe it does skim better, got a shop owner my side who is testing one out and he told me he does believe it skims better.

I've been running water at the same level and it has been skimming well. Remember that my definition of well is not great right now due to a fallow tank with low nutrients but it is skimming!

Never really had an issue with micro bubbles before the mod but there aren't any now.

My curve 5 was always quiet.

This plate completely replaces the old plate and you literally just push the screw threw the hole in the new plate and twist the plate with the screw into position on the skimmer reaction chamber.

I want to ensure it is a solid design before I share any plans for it.

Won't be able to sell to anyone as I'm based in South Africa

Hope that helps

 

[Simply__J]

I believe it does skim better, got a shop owner my side who is testing one out and he told me he does believe it skims better.

I've been running water at the same level and it has been skimming well. Remember that my definition of well is not great right now due to a fallow tank with low nutrients but it is skimming!

Never really had an issue with micro bubbles before the mod but there aren't any now.

My curve 5 was always quiet.

This plate completely replaces the old plate and you literally just push the screw threw the hole in the new plate and twist the plate with the screw into position on the skimmer reaction chamber.

I want to ensure it is a solid design before I share any plans for it.

Won't be able to sell to anyone as I'm based in South Africa

Hope that helps

Thank you so much...should have known better about the plate as I've taken mine apart and cleaned it too many times. I let my excitement get the best of me. Last questions, soon as you feel comfortable sharing the plans are you going to post them? Where will we be able to find them?

 

[Alemoki]

I will post the plans here for sure man!

Only request will be that if people make them they share pics of the installation and in action on this thread;)

 

[Simply__J]

I will post the plans here for sure man!

Only request will be that if people make them they share pics of the installation and in action on this thread;)

Fair enough!

 

[McPikie]

I will post the plans here for sure man!

Only request will be that if people make them they share pics of the installation and in action on this thread;)

Man, that looks awesome. Any chance you could PM me the file so I could have someone in the UK 3d print this for me? I have the curve 5 and always feel it's a little weak

 

[Alemoki]

Man, that looks awesome. Any chance you could PM me the file so I could have someone in the UK 3d print this for me? I have the curve 5 and always feel it's a little weak

Hey there. Will update this thread in the upcoming weeks and will definitely send the files. Have had a number of requests for curve 7 and curve 9 versions as well so once those are done will organise for all the files to be put up here

 

[mrjoev]

Following for the Curve 7 File and to say thank you for figuring this out for us!!!

 

[iTzJu]

Hey there. Will update this thread in the upcoming weeks and will definitely send the files. Have had a number of requests for curve 7 and curve 9 versions as well so once those are done will organise for all the files to be put up here

Hey, any update on the files? picked up a BM5 and would love to do this mod

 

[Alemoki]

Hey, any update on the files? picked up a BM5 and would love to do this mod

Hey there

I will post the STL file up tonight for everyone. My skimmer has been running with it for a while now and I do like it.

 

[Alemoki]

Sorry for the delayed response everyone.

Cannot send the STL here so have finally created myself a thingiverse account. However it will not allow me to post anything for 24 hours. So I will have to postpone the upload till Tuesday.

Sorry for the delays.

 

[McPikie]

Sorry for the delayed response everyone.

Cannot send the STL here so have finally created myself a thingiverse account. However it will not allow me to post anything for 24 hours. So I will have to postpone the upload till Tuesday.

Sorry for the delays.

Looking forward to it buddy.

 

[Alemoki]

http://www.thingiverse.com/thing:3761333

And here it is guys!