Dinoflagellate cause bad readings with the Red Sea Pro / Hanna P04 tests?

m.kristoff

Well-Known Member
View Badges
Joined
Sep 17, 2021
Messages
615
Reaction score
238
Location
cleveland
Rating - 100%
7   0   0
I am running the red sea po4 pro test in my mastertronic. I started getting super low po4 reading from it. Usually, I can get the exact same reading from my Mastertronic and my Hanna tester. I ran reference fluid on both my Hanna and the Mastertronic using your PO4 test and they both read it exactly the same so both are working correctly.

When I test my tank water with the Mastertronic using the Red Sea Pro test comes back with super low numbers. When I test using the Hanna. I am getting 0.05.

I am having a big Dino issue . Can Dinoflagellate cause errors with the tests? I am not dosing silicates yet.



 

Dan_P

5000 Club Member
View Badges
Joined
Sep 21, 2018
Messages
6,824
Reaction score
7,301
Rating - 0%
0   0   0
I am running the red sea po4 pro test in my mastertronic. I started getting super low po4 reading from it. Usually, I can get the exact same reading from my Mastertronic and my Hanna tester. I ran reference fluid on both my Hanna and the Mastertronic using your PO4 test and they both read it exactly the same so both are working correctly.

When I test my tank water with the Mastertronic using the Red Sea Pro test comes back with super low numbers. When I test using the Hanna. I am getting 0.05.

I am having a big Dino issue . Can Dinoflagellate cause errors with the tests? I am not dosing silicates yet.



Sounds like your phosphate level is low.
 

The_Paradox

Valuable Member
View Badges
Joined
May 6, 2023
Messages
2,091
Reaction score
2,235
Location
On the Water
Rating - 0%
0   0   0
Dinos will consume phosphate. If you have a decent outbreak of them they will strip the water column nitrate and phosphate to zero.
 

taricha

5000 Club Member
View Badges
Joined
May 22, 2016
Messages
6,636
Reaction score
10,255
Rating - 0%
0   0   0
When I test my tank water with the Mastertronic using the Red Sea Pro test comes back with super low numbers. When I test using the Hanna. I am getting 0.05.

I am having a big Dino issue . Can Dinoflagellate cause errors with the tests?
as others have said, the simpler explanation is that the PO4 levels is quite low, and nuisance outbreaks can also push it low. Regardless - at very low PO4 levels, the different test kit sensitivities can cause them to disagree at very low levels.
 

Randy Holmes-Farley

Reef Chemist
View Badges
Joined
Sep 5, 2014
Messages
68,134
Reaction score
64,588
Location
Arlington, Massachusetts, United States
Rating - 0%
0   0   0
Just on the specific dino question, there's no reason to think the presence of any organism in the tank will cause an interference in phosphate testing.
 
OP
OP
m.kristoff

m.kristoff

Well-Known Member
View Badges
Joined
Sep 17, 2021
Messages
615
Reaction score
238
Location
cleveland
Rating - 100%
7   0   0
Just on the specific dino question, there's no reason to think the presence of any organism in the tank will cause an interference in phosphate testing.
thanks for your response. I am sure that my po4 levels are super low because of the dino's. I Just wanted to rule out interference of the tests.
 

Managing real reef risks: Do you pay attention to the dangers in your tank?

  • I pay a lot of attention to reef risks.

    Votes: 124 42.5%
  • I pay a bit of attention to reef risks.

    Votes: 101 34.6%
  • I pay minimal attention to reef risks.

    Votes: 47 16.1%
  • I pay no attention to reef risks.

    Votes: 15 5.1%
  • Other.

    Votes: 5 1.7%
Back
Top