DIY Media Reactors

[geneboom]

I don't have these anymore since I have upgraded the tank to 900 gallon tank and no longer use media reactors, just plain system with huge fuge

Thanks for this post. I know it's been awhile but wondering how you attached the acrylic tubes to the PVC fittings both on top and the bottom so they didn't leak.

Thank you

 

[ravi197699]

bottom one I filled with 2 part epoxy and top one I used clear weld on cement, I used clear primer 2 layers, once the clear primer on then used weld on cement, not the water thin version but the one that is similar viscosity as to pvc cement, let it dry for 24 hrs and then you will be good to go,