Dosing equipment....

[thesoulpatch]

Hey i just got a used eshopps doser. I wanna replace all the tubing and can't find the stuff anywhere.....

help? lol I wanna replace the tubing inside the pump and the actual tubing that will dose into the tank.

1. The tubing in the pumps i have no idea where to get it or what it's called....

2. Is the other tubing that takes it from the pump to the tank is that just airline tubing?

3. What should i use to grease it all up?

 

[dbl]

The tubing at the pump is specific to the pump. Like the example below is for a GHL dosing pump. You'll have to find one for the Eshopps pumps. For all I know, the GHL hose may very well work in your dosing pump, but I'm not certain.

The feed and distribution lines you can just use airline tubing from a big box store.

https://www.bulkreefsupply.com/dosi...TElEyLQdekD0KO67XYzQdCx2Wfd9aeYRoC_s0QAvD_BwE

 

[thesoulpatch]

Is it not just a novoprene tube? I just figured they were all the same and it was a cut to fit. Am I wrong? Every doser that I've been looking up has the same looking hose?

 

[link81]

novoprene will most likely work just fine. However make sure you have the correct ID and OD otherwise the dose per revolution will change.

 

[thesoulpatch]

Okay, that's been the hardest thing to find. I'm waiting on eshopps to respond to email for help with that. I may also call them later as well.

 

[thesoulpatch]

I called them they are sending more them for free. Whoo.