- Joined
- May 3, 2020
- Messages
- 183
- Reaction score
- 157
Hello R2R. I'm coming back into saltwater after finishing my PhD (6 years ago) and now that my boys are a bit older. When I moved, I tore down a 90 gallon mostly fish tank (a couple corals but I never had much luck with them). This time around, my wife thought it would be good to have a tank in the bedroom as our boys sleep in there with us and it could serve like a night light. I do think we'll be in a bigger tank within a year or two (probably 120-180).
I've already had a little bit of a rougher go this time around. This is mostly due to some poor practice that I knew better of (quarantine *every* fish). But it did give me a nice excuse to upgrade. The wife just wanted a simple hang on back filter, though I knew a sump would be superior.
So, let's start this build thread off with what does actually exist in the new build. This is namely... the SUMP! I picked up a 20L and some acrylic sheet. I had some extra HDPE so I pulled that in as well. I'm pretty limited in terms of what I can do in the sump as the stand is pretty short (tank height was desired to be at bed height, which gives me 21" in the stand). I sectioned it to have a drain section (for full siphon) and a pair of filter socks. I have built in overflow protection if the socks get dirty. It has a skimmer and reactor section, a "media section" which I've filled with bioballs to help provide bacteria area, and a return section. I also added a DIY heater holder. The first section holds the base with a nylon bolt and the section section is a press fit to hold the top of the heater. I still need to build a probe and ATO line holder, but I need to figure out the diameter of the probes... anyone want to help out with that?
More to come... including the custom built stand (I do woodworking on the side, with an LLC and everything... which is how I have the tools for acrylic/HDPE fabrication).
![20200516_182402.jpg 20200516_182402.jpg](https://www.reef2reef.com/data/attachments/1515/1515024-50df23c0f90a8378d78680210c2e6ba1.jpg)
I've already had a little bit of a rougher go this time around. This is mostly due to some poor practice that I knew better of (quarantine *every* fish). But it did give me a nice excuse to upgrade. The wife just wanted a simple hang on back filter, though I knew a sump would be superior.
So, let's start this build thread off with what does actually exist in the new build. This is namely... the SUMP! I picked up a 20L and some acrylic sheet. I had some extra HDPE so I pulled that in as well. I'm pretty limited in terms of what I can do in the sump as the stand is pretty short (tank height was desired to be at bed height, which gives me 21" in the stand). I sectioned it to have a drain section (for full siphon) and a pair of filter socks. I have built in overflow protection if the socks get dirty. It has a skimmer and reactor section, a "media section" which I've filled with bioballs to help provide bacteria area, and a return section. I also added a DIY heater holder. The first section holds the base with a nylon bolt and the section section is a press fit to hold the top of the heater. I still need to build a probe and ATO line holder, but I need to figure out the diameter of the probes... anyone want to help out with that?
More to come... including the custom built stand (I do woodworking on the side, with an LLC and everything... which is how I have the tools for acrylic/HDPE fabrication).
![20200501_104409.jpg 20200501_104409.jpg](https://www.reef2reef.com/data/attachments/1515/1515010-6877d4e34b5a82be50b055119d735b6a.jpg)
![20200501_192941.jpg 20200501_192941.jpg](https://www.reef2reef.com/data/attachments/1515/1515011-c4e80ef79fc38814cbfa4a383fda9898.jpg)
![20200502_113140.jpg 20200502_113140.jpg](https://www.reef2reef.com/data/attachments/1515/1515012-ab4b9fcf33e5264f1273c165de3c7141.jpg)
![20200502_152404.jpg 20200502_152404.jpg](https://www.reef2reef.com/data/attachments/1515/1515013-3fb7b9e3adf72396e6bbec7dcf686e36.jpg)
![20200502_175144.jpg 20200502_175144.jpg](https://www.reef2reef.com/data/attachments/1515/1515014-503e66996fcbd4d6e371cb7384a10fae.jpg)
![20200504_185224.jpg 20200504_185224.jpg](https://www.reef2reef.com/data/attachments/1515/1515015-222051c8bb5e1c7f6e2c8da8084bea4a.jpg)
![20200505_191306.jpg 20200505_191306.jpg](https://www.reef2reef.com/data/attachments/1515/1515016-3b81fe60596bd564aa03bca8741aa761.jpg)
![20200508_154553.jpg 20200508_154553.jpg](https://www.reef2reef.com/data/attachments/1515/1515017-647e7a73b041736c8c52bcf709480fdf.jpg)
![20200516_092831.jpg 20200516_092831.jpg](https://www.reef2reef.com/data/attachments/1515/1515019-a624e708dd5eb091f07e11158728b335.jpg)
![20200516_114136.jpg 20200516_114136.jpg](https://www.reef2reef.com/data/attachments/1515/1515021-1b89afa6917a21b110d2c54d55117df5.jpg)
![20200516_144328.jpg 20200516_144328.jpg](https://www.reef2reef.com/data/attachments/1515/1515022-3167f2d811924c01d3b3a8a87568f47e.jpg)
![20200516_151301.jpg 20200516_151301.jpg](https://www.reef2reef.com/data/attachments/1515/1515023-d2c5032b393072a94fd9dab91519b836.jpg)
![20200516_182402.jpg 20200516_182402.jpg](https://www.reef2reef.com/data/attachments/1515/1515024-50df23c0f90a8378d78680210c2e6ba1.jpg)