Drill press for tank drilling

[ReefWithCare]

Hi all,

I’m drilling a tank for the first time and rather lay it safe and buy a drill press kit so I can do this right. I found a cheaper kit at ace that seems comparable to the one sold at BRS.

https://m.acehardware.com/product/i...MIu5GO6OLa2gIVG0sNCh1_fwEWEAQYAiABEgJY3_D_BwE

Would this work? I also prefer to just pick it up locally since I’ll be drilling this weekend. I know about removing the springs from BRS’s video.

 

[mcarroll]

That link has been genericized....just goes to their homepage. ;Dead

:p

 

[ReefWithCare]

That link has been genericized....just goes to their homepage. ;Dead

[emoji14]

Does this work?

https://m.acehardware.com/product/i...MIu5GO6OLa2gIVG0sNCh1_fwEWEAQYAiABEgJY3_D_BwE

The name is Milescraft Steel 1 pk Drill Press(13180003)

 

[BZOFIQ]

I've used this to drill more than a dozen of holes. It was the first time I drilled holes in glass and all went smooth.

I've since lent it to others to use and nobody had any complaints

https://www.amazon.com/gp/product/B000JCIMEA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I removed the springs in the picture so that I dont have to fight them as I apply very light pressure.

The press in your link appears the same; you'll be fine.

 

[ReefWithCare]

I've used this to drill more than a dozen of holes. It was the first time I drilled holes in glass and all went smooth.

I've since lent it to others to use and nobody had any complaints

https://www.amazon.com/gp/product/B000JCIMEA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I removed the springs in the picture so that I dont have to fight them as I apply very light pressure.

The press in your link appears the same; you'll be fine.

Thank you! I’ll order it today. I plan on lending it out to the local reef club here [emoji106]

 

[Bayareareefer18]

Thank you! I’ll order it today. I plan on lending it out to the local reef club here [emoji106]

I just recently drilled my first tank. Unfortunately I found out the hard way tank was tempered:(
Second attempt went flawlessly. As nerve racking as it is it's a pretty straight forward process I must say. Didn't use a press just went super slow and let the drill do the work