extension for a solenoid

[Susan Edwards]

I am adding a solinoid (apex) to the apex ato. The cable is just a bit too short doing from garage to laundry room (where the fmm will be). And I'm betting too short for the ones to go from laundry room to sump.

Is there an extender cable for these? The plug looks like a headphone jack but there are 4 connections ( 3 stripes-headphones have 2) per my husband who has never seen a plug like this.

 

[SuncrestReef]

Neptune makes a 10 foot extension cable for the solenoid:

DC24 Extension Cable

The DC24 Extension Cable lets you increase the distance between your EB832 or 1Link module and the accessory being used. Designed for Neptune Systems DC24v power systems that are found on the 1Link module and Energy Bar 832. 10 Foot extension Male - Female A perfect example is if you use the...

www.bulkreefsupply.com

But they only support using a single extension.

For the optical sensors, some people have reported success with this extension cable:
Amazon product

Neptune doesn’t officially support extending the optical sensor cables, so try at your own risk and test it thoroughly.

 

[Susan Edwards]

Neptune makes a 10 foot extension cable for the solenoid:

DC24 Extension Cable

The DC24 Extension Cable lets you increase the distance between your EB832 or 1Link module and the accessory being used. Designed for Neptune Systems DC24v power systems that are found on the 1Link module and Energy Bar 832. 10 Foot extension Male - Female A perfect example is if you use the...

www.bulkreefsupply.com

But they only support using a single extension.

For the optical sensors, some people have reported success with this extension cable:
Amazon product

Neptune doesn’t officially support extending the optical sensor cables, so try at your own risk and test it thoroughly.

thank you!!!