Extremely High DKH

ReefingDan

New Member
View Badges
Joined
Oct 30, 2020
Messages
20
Reaction score
11
Location
Durand
What state or country do you live in
Illinois
Rating - 0%
0   0   0
Hello everyone. I'm new to the reef hobby. I had a 40 breeder at 1 time before I cracked it that was FWLRO but recently got a coral added in my new aquarium. I am running a 20 long because its easier for me to work with for now. My concern is that my DKH in both the tank and the salt water I mix is upwards of 20. I figured first tests were wrong but I have tested both the tank and my mixed salt water 3 times with same results. I went with this salt mix because I've seen many people have extreme success with their tanks but not sure what I'm doing wrong. I get RODI water from a LFS and only add replenish by searches to my topoff water. The gravity of my salt water is 1.023-1.025. I don't have a refractometer so I use the hydrometer. Im not seeing negative results with my chalice frag yet but don't want to keep waiting only to find its to late to change anything. I just lost my anemone that I had and figured maybe it was because of the ammonia spike of .25-.5 ppm but after this new test I'm not sure.

16040417896475778299131870625502.jpg
 
I never understood how a dip stick could possibly work to measure alkalinity in seawater.

Try the API kit on some of the new water. If they gave you tap instead of RO/DI, it might get to 20 dKH.
 
I never understood how a dip stick could possibly work to measure alkalinity in seawater.

Try the API kit on some of the new water. If they gave you tap instead of RO/DI, it might get to 20 dKH.

I use dip stick for the nitrate and ph test I do the api drops for everything else
 
API ammonia test kits are notorious for being In accurate. Invest in some better test kits. Check your hydrometer against a know sample or a You could ask another reefer close to you to test your water or have a LFS test it.
 
Does the hydrometer read 1.000 in RO water?
I question the test result as well. Maybe have the LFS test your tank water?
 
I never understood how a dip stick could possibly work to measure alkalinity in seawater.

Try the API kit on some of the new water. If they gave you tap instead of RO/DI, it might get to 20 dKH.
Maybe they gave him saltwater
 
Is that a typo, or is that the lowest reading? If it’s the lowest reading it sounds like there’s not a great way to verify the device accuracy.
That is the lowest reading on my hydrometer. The needle is literally rock bottom in the hydrometer.
 
This is my ammonia test. Been less than a week since my anemone died. He was removed from the aquarium. Last test for ammonia was between .25 and .50 I did two tests but both with same results. Im not over feeding. I wonder if dosing ammo lock is keeping it from going to nitrite? Doing a 20% water change now and will probably do another either tomorrow or Thursday. I will test my Nitrate and DKH before water changes and post results too. I've never had this problem before.... Im freaking out.

20201103_211623.jpg
 
This is my ammonia test. Been less than a week since my anemone died. He was removed from the aquarium. Last test for ammonia was between .25 and .50 I did two tests but both with same results. Im not over feeding. I wonder if dosing ammo lock is keeping it from going to nitrite? Doing a 20% water change now and will probably do another either tomorrow or Thursday. I will test my Nitrate and DKH before water changes and post results too. I've never had this problem before.... Im freaking out.

20201103_211623.jpg
Holy smokes on the ammonia!!! That would explain dead things. As for DKH... I second the test kits. I was adding and adding and adding superbuffer because my kit kept saying I was low. Then my tank went haywire and my LFS tested it.... I was at 17. Turns out my kit, which I had only recently purchased has sat on the shelf a long time... it was expired.
Now, my tank is crazy messed up... algae blooms, my nitrates are crazy high.... water change and patience.... that's my best advice.
Also I got the most consistent water parameters when I filled 5 gallon bottles at Walmart or Publix for RODI. It was less than the LFS and my water parameters were always the same. Could not say the same from my LFS.... can't say why. Maybe the stores change the filters and membrane more often?
Best of luck.... we are here if you need help.
 
So nitrates are stupid high too.... on the flip side my DKH is right around a high 12

20201103_214115.jpg
 
The anemone died with the nitrateas around .25 and .50 ppm all 3 fish are alive and still have color in my coral as well.

20201102_192353.jpg
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.5%
  • I decorate AROUND the tank or stand

    Votes: 4 18.2%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 13 59.1%
  • We don’t decorate for the holidays

    Votes: 4 18.2%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new