Finnex marine+ 24/7 +

Anybody wanna give me some advice on setting this light up for corals? Please and thank you lol
Welcome to R2R
Welcome to R2R.JPG

Have look on BRS videos on YouTube or ask in the forums more specific

good luck
 
Upvote 0
Welcome. After a quick search it looks like the remote has everything needed to setup the light in 3 hour increments. I'm not sure what corals you are planning to put in your aquarium, but I would test the PAR and ensure it is sufficient before purchasing them.
 
Upvote 0
Welcome. After a quick search it looks like the remote has everything needed to setup the light in 3 hour increments. I'm not sure what corals you are planning to put in your aquarium, but I would test the PAR and ensure it is sufficient before purchasing them.
Thank you for the advice. I have a few corals that I’ve a had about 2 months now. Just started getting nuisance algae on the crushed live rock sand bed and I’ve been running the factory 24/7 mode my coral seem to be doing fine I just didn’t want to starve them for light by giving to less light. I’ve been told less light time would help with the algae.
 

Attachments

  • image.jpg
    image.jpg
    319.3 KB · Views: 74
Upvote 0
Welcome to R2R and +1 on @vetteguy53081 recommendation except if you have to do 3 hour increments maybe go 9 or 12 blue and 6 white. Most will recommend shorter hours for whites to help reduce algae problems. Your corals predominately use the blues.

R2RWelcome.jpg
 
Upvote 0
Welcome to R2R and +1 on @vetteguy53081 recommendation except if you have to do 3 hour increments maybe go 9 or 12 blue and 6 white. Most will recommend shorter hours for whites to help reduce algae problems. Your corals predominately use the blues.

R2RWelcome.jpg
So my blues on bright?
Welcome to R2R and +1 on @vetteguy53081 recommendation except if you have to do 3 hour increments maybe go 9 or 12 blue and 6 white. Most will recommend shorter hours for whites to help reduce algae problems. Your corals predominately use the blues.

R2RWelcome.jpg
So my blues on high?
 
Upvote 0
So my blues on bright?

So my blues on high?
This is very hard to answer as it depends on your tank, your aquascape and the tanks inhabitants. It appears that the fixture you have is relatively low wattage (around 1 watt per inch) and seems to be rated for softie and LPS corals so I doubt you can set it too high but... too low is better than too high. Sorry I can't help more but every tank is unique. I do think that you can probably set the blues to high safely but only PAR measurements will really answer the question.
 
Upvote 0
Thank you for the advice. I have a few corals that I’ve a had about 2 months now. Just started getting nuisance algae on the crushed live rock sand bed and I’ve been running the factory 24/7 mode my coral seem to be doing fine I just didn’t want to starve them for light by giving to less light. I’ve been told less light time would help with the algae.
If doing fine, don’t change the mode
 
Upvote 0
Upvote 0
Reducing time whites are on or it’s intensity will help with that
Thank you so much. That’s how I’ve been trying to ask the question lol when I alter times on the light I have to intensify or reduce the color I want to change.
 
Upvote 0
Welcome to R2R and the salty world Brad. I don’t know the lights but it sounds like you have been given some good advice. Lots of knowledgeable and helpful people here who will support and advise you when needed.
 
Upvote 0
Anybody wanna give me some advice on setting this light up for corals? Please and thank you lol

Welcome! Glad you joined. Going to defer to others on lighting as not my strong suit. IF you don't get the answers you seek here, there is another area of Forums for Lighting, and people who know lighting watch and answer (like us friendly folks who take our 'welcome' seriously <wink>, except for lighting)

Have you considered starting your build thread? I found its a great place to document my tank's evolution for myself. I started tank first then joined, so I'm still finding myself going back collecting pictures & updating historically as well as current state. Once you create your first post in your thread and link it to your account, they will give you build badge (look left, under my ID)

This is a good reference book type online article I still review:
https://www.reef2reef.com/ams/the-supreme-guide-to-setting-up-a-saltwater-reef-aquarium.84/
 
Upvote 0

WHEN YOU SEE A REEF2REEF POLL, WHAT’S YOUR USUAL MOVE?

  • Vote right away, then head to the comments

    Votes: 4 57.1%
  • Read the comments first...then decide what I think

    Votes: 0 0.0%
  • Vote and explain my choice in the comments

    Votes: 0 0.0%
  • Dude, I just vote...I don't care about the comments

    Votes: 1 14.3%
  • Vote, then come back later to see how it turned out

    Votes: 0 0.0%
  • Pick “Other” because my opinion is too nuanced to fit any of your simpleton boxes

    Votes: 1 14.3%
  • I usually read the comments but exercise my right not to vote

    Votes: 0 0.0%
  • I always get excited about Daniel’s daily polls, obviously 😎

    Votes: 1 14.3%
  • Other (Post in the comments)

    Votes: 2 28.6%
Back
Top
Home
Post thread…
Market
What's new