Flow rate for denitrification in canister

  • Thread starter Thread starter NatsRams
  • Start date Start date
  • Tagged users Tagged users None

NatsRams

Community Member
View Badges
Joined
Jan 22, 2022
Messages
98
Reaction score
33
Location
alachua county
What state or country do you live in
Florida
Rating - 0%
0   0   0
I’ve set up canisters with Seachem de-nitrate. Seachem says the max flow rate should be 200L/h but doesn’t say anything about minimum flow. Flow the the canisters right now is about 36 L/h. What would be a minimum flow? I can adjust up if necessary.

TIA
 
I don't think the flow matters that much as long as it's slow enough. Regardless, I'd be worried that you would end up just producing hydrogen sulfide.
 
I’ve set up canisters with Seachem de-nitrate. Seachem says the max flow rate should be 200L/h but doesn’t say anything about minimum flow. Flow the the canisters right now is about 36 L/h. What would be a minimum flow? I can adjust up if necessary.

TIA
I would think that the closer you can get to 200, the better it will work overall (due to more water being exposed to the bacteria in the canister), but other than that, 36 seems reasonable.

Regardless, I'd be worried that you would end up just producing hydrogen sulfide.

Why would this happen? And if it did, how would it escape the canister (in a large enough amount) to cause any issues?
 
I would think that the closer you can get to 200, the better it will work overall (due to more water being exposed to the bacteria in the canister), but other than that, 36 seems reasonable.



Why would this happen? And if it did, how would it escape the canister (in a large enough amount) to cause any issues?
I would think that the closer you can get to 200, the better it will work overall (due to more water being exposed to the bacteria in the canister), but other than that, 36 seems reasonable.



Why would this happen? And if it did, how would it escape the canister (in a large enough amount) to cause any issues?
I would think that the closer you can get to 200, the better it will work overall (due to more water being exposed to the bacteria in the canister), but other than that, 36 seems reasonable.



Why would this happen? And if it did, how would it escape the canister (in a large enough amount) to cause any issues?


Hydrogen sulfide easily forms in areas with little to no oxygen, such as deep sand beds and what not. Randy has a write up on it, and lists out the order of preference that bacteria use certain elements/compounds for denitrification over others. It's a neat article of you want to check it out. I think the main title is about denitrification or on hydrogen sulfide?
 
I’ll look for his article. While I’m sure it won’t reference flow, it likely references O2 levels. I could test the effluent for O2 and get some idea if it’s too slow.
 
Hydrogen sulfide easily forms in areas with little to no oxygen, such as deep sand beds and what not. Randy has a write up on it, and lists out the order of preference that bacteria use certain elements/compounds for denitrification over others. It's a neat article of you want to check it out. I think the main title is about denitrification or on hydrogen sulfide?
I understand the concept, I just don't think it is a concern in this situation.
 
looks like this material is not Sulfur, nor is there any organic carbon being added. I wouldn't expect any hydrogen sulfide potential.
"No danger of hydrogen sulfide production as with sulfur based media"
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new