Frag Discs Turning Orange/RUST

  • Thread starter Thread starter Pygmey
  • Start date Start date
  • Tagged users Tagged users None

Pygmey

Active Member
View Badges
Joined
May 1, 2014
Messages
184
Reaction score
43
Rating - 0%
0   0   0
Randy,

Curious if you know what this could be. I had a great thriving tank with corals growing. Even corals recovering from someone else's tank. Corals started growing so I glued them to larger frags. This is a 40 gallon tank. Over the last few weeks I started getting recession and even losing some. I tested all params and they looked good. Reached out to fellow trusted reefers and noone had an idea.

I removed a frag from the tank and pried it off the disc. Underneath the glue between the frag and the disc was rust colored. Broke the disc in half and the orange went all the way through the disc.

Is this causing a release of metals?? I put in a poly-filter to try to extract it.. I also saved water that will be sent to triton pre poly-filter. I am hoping that will show that I had elevated metals. Attached is a pic. Let me know your thoughts.

Thanks

28279811_10213421495068968_2247602251952553984_o.jpg
 
Looks like is was in an anaerobic part of the frag? If it were rust seems like there would be more on the outside of the disk.
 
I just find it odd that any frag glued to that disc that had orange started to recede
 
I guess my theory(not saying I am correct) is there are metals either in the frag disc or the glue and the other is reacting with it.
 
I'm not sure what that is.

Do you know what the plugs are made of? There may have been iron in the mix used to make it.
 
I had the same problem with the corals i purchased ... i now clip off all my SPS and glue onto a new disk
 
I do not know what they are made of but I would agree it looks like the aftermath of iron.. Do you know if that would release enough metals in the water to cause chalices and favias to recede. It seems like the ones that did it are either directly on the disc or were close to it
 
I do not know what they are made of but I would agree it looks like the aftermath of iron.. Do you know if that would release enough metals in the water to cause chalices and favias to recede. It seems like the ones that did it are either directly on the disc or were close to it

Iron release is not a problem. Many people dose it (Red Sea recommends extremely high doses, IMO) and many use GFO (iron).

The concern would presumably be if other metals were there too.
 
Well I was having great growth and colors.. Then a few weeks after adding these discs I started to have recession of tissue on chalices and favias.. Parameters are good.. So if this is not it then I have no clue what it could be
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 2 9.1%
  • Lighting, pumps, or other major equipment

    Votes: 3 13.6%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 9.1%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 9.1%
  • Corals! Must...Have...CORALS!!!

    Votes: 5 22.7%
  • Fish or other livestock

    Votes: 1 4.5%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 4.5%
  • I’m browsing, but don’t have a specific target

    Votes: 4 18.2%
  • I’m not shopping for reef deals this year

    Votes: 1 4.5%
  • Other (Post in the comments)

    Votes: 1 4.5%
Back
Top
Home
Post thread…
Market
What's new