Fragging 101 I Duncan Coral

mikejrice

Well-Known Member
View Badges
Joined
Oct 15, 2011
Messages
509
Reaction score
735
Location
Denver, Colorado
Rating - 0%
0   0   0


Methodology:

The method I use for fragging the majority of hard corals is primarily the same with the cutting tooling being a Gryphon band saw.

Cooling liquid used is fresh mixed saltwater with enough iodine to color it a light amber. This helps to disinfect cuts as they're made which has shown to greatly increase frag survival.

All corals are stored during cutting in a small bucket holding water taken directly from their home aquarium. This water is used both to keep them wet as well as for rinsing any flesh away from cuts while I'm working on them.

All finished, and rinsed, frags or trimmed colonies are soaked in Brightwell Aquatics Restor dip to insure that minimal flesh is lost.

Both soak buckets are rinsed and replenished between colonies to reduce the risk of interactions between loose flesh of different coral species.

Notes about duncans:

Duncans have extremely sensitive flesh that is susceptible to infection if damaged. As always, while handling torch, be sure to keep specimens fully submerged until polyps retract.

Duncans form in varying densities of branches which can make fragging them different for every colony. Be sure to cut between polyps and always cut branches off as far below the polyp as possible.

Some colonies can form in extremely sight bunches like the one in the video. For these, cut them up directly along the ridges that divide the polyps.

If there's a specific species you would like to see fragged, leave a comment below.

Subscribe:
http://www.youtube.com/subscription_center?add_user=mikejrice1

http://www.captivecoral.net
http://www.fragging101.wordpress.com

-~-~~-~~~-~~-~-
Please watch: "Lets Talk Beginner Soft Corals"

-~-~~-~~~-~~-~-
0f3c55249e5b0a0866e0edfe05d54ac2.jpg
f24bd7cb5f861cf3ba56f10578757c6f.jpg
04c4571447163428480c50630e853278.jpg
9d55773a599cd9fc45a3d7f98a9de62e.jpg
 
OP
OP
mikejrice

mikejrice

Well-Known Member
View Badges
Joined
Oct 15, 2011
Messages
509
Reaction score
735
Location
Denver, Colorado
Rating - 0%
0   0   0
Awesome post. Thanks! What glue do you prefer? Attachment tips? Sometimes mine come loose. :)
I prefer coralife glue because they're not trying to make it sooo thick that it won't come out of the bottle without a hulk grip haha.

For attachment, the biggest thing is getting a nice flat surface on the bottom of the frag so it can adhere well to the plug. You're not alone though; some of my frags fall off most times.
 

Big G

captain dunsel
View Badges
Joined
Jun 8, 2017
Messages
12,921
Reaction score
27,288
Location
Southern Oregon
Rating - 0%
0   0   0
I prefer coralife glue because they're not trying to make it sooo thick that it won't come out of the bottle without a hulk grip haha.

For attachment, the biggest thing is getting a nice flat surface on the bottom of the frag so it can adhere well to the plug. You're not alone though; some of my frags fall off most times.
Thanks for the reply and advice
 
OP
OP
mikejrice

mikejrice

Well-Known Member
View Badges
Joined
Oct 15, 2011
Messages
509
Reaction score
735
Location
Denver, Colorado
Rating - 0%
0   0   0
Cut up another big colony of duncans recently and had awesome survival rates as usual. These are definitely one of the toughest and easiest healing of LPS corals. The key is not to get into the flesh when cutting below polyps. If you can see flesh inside the skeleton when looking at the base of cut branches, than you're cutting to close to the polyp. Usually at least one inch below the polyp is space enough.
a41a17cb0029ab1c0aa83a8d452ca3f0.jpg
3fe117bbaefb9b2eb943fd452f806dc3.jpg
d3b1bc062032706d357391d2a1c95e1f.jpg
796b69b7c79488673f11f0bb0109fb3b.jpg
 
OP
OP
mikejrice

mikejrice

Well-Known Member
View Badges
Joined
Oct 15, 2011
Messages
509
Reaction score
735
Location
Denver, Colorado
Rating - 0%
0   0   0

Mastering the art of locking and unlocking water pathways: What type of valves do you have on your aquarium plumbing?

  • Ball valves.

    Votes: 39 47.6%
  • Gate valves.

    Votes: 42 51.2%
  • Check valves.

    Votes: 17 20.7%
  • None.

    Votes: 22 26.8%
  • Other.

    Votes: 8 9.8%
Back
Top