GCC connec to P4 by IP

[doodguy]

Has anyone had any luck connecting GCC control software to P4 by IP? I put the IP in, default port 10001 Type of conn TCP/IP but it won't connect.

Works fine via USB

 

[WWIII]

Yes mine works fine. Are you able to ping the p4? 4 packets sent, 4 recieved?

 

[doodguy]

Yes mine works fine. Are you able to ping the p4? 4 packets sent, 4 recieved?

Yes. Odd :(

 

[WWIII]

Have you updated the wifi firmware? Also you can try port 80.

@Ditto when you have time! ;-)

 

[Ditto]

The host ip is only the IP address not the https://

Just place:
192.168.5.71

Are you running Windows 10?

 

[WWIII]

The host ip is only the IP address not the https://

Just place:
192.168.5.71

Are you running Windows 10?

Good eye!!!

 

[doodguy]

Have you updated the wifi firmware? Also you can try port 80.

@Ditto when you have time! ;-)

My P4 firmware is 719

My wifi firmware is 6913

Tried port 10001 and 80 no success :(

 

[doodguy]

The host ip is only the IP address not the https://

Just place:
192.168.5.71

Are you running Windows 10?

I tried both with and without the http:// was just guessing what the software wants. No luck

 

[Ditto]

Are you using windows 10?

If you are you need to follow these steps :)

https://www.reef2reef.com/threads/need-help-connecting-to-p4-wifi.531904/page-5#post-5518628

You should also leave the default port # and just use the IP Address, I am hoping it is Windows 10 stopping you :)

 

[Ditto]

@doodguy - Did the above work for you? Were you able to connect?

 

[doodguy]

@doodguy - Did the above work for you? Were you able to connect?

Sorry for delayed reply! I didn't get a notice about your reply (stupid email)

It appears by terrible timing from when I pinged my P4 to when I was trying to connect the wifi on the P4 had gone off. After WWIII asked if I could ping it I was like hmmm of course. I then started a continuous ping and got no replies!!!

I rebooted my P4 and connected to the IP port 10001 it is working now in GCC! Only issue is sometimes it locks up and disco's when connected via wifi, But its overall working fine!