Glass-Holes 700 return elbow is leaking. Need help!

  • Thread starter Thread starter glb
  • Start date Start date
  • Tagged users Tagged users None
This is how I have mine installed. I have the flange in the back and the nut inside of the box (the opposite of how the OP has his). The street 90 screws into the flange side and the nut is easily removed inside the box, so it is easy to disassemble. I use 1" silicone tubing on the drain side.

Bulkhead.jpg
 
I think this is a thread on thread leak. Male elbow thread into a female threaded bulkhead. Teflon tape should stop the leak as it's not under pressure. Now if it's cracked, that's different.
Sorry, I was referring to the post about gluing the pipe into the bulkhead.
 
I think this is a thread on thread leak. Male elbow thread into a female threaded bulkhead. Teflon tape should stop the leak as it's not under pressure. Now if it's cracked, that's different.
That’s exactly what it was, thank goodness.
 
there is no such things as 'teflon' tape as the company who makes teflon (chemours) has never made this type of tape. i think you are referring to pipe thread sealant tape. that stuff was never intended to create water proof seals with plastic fittings. it should not be used in our hobby for pipe joints.


Or just unthread it, clean the threads inside and out and use some Teflon tape on the male threads.
 
Just a primer but for everyone; teflon tape isn't for threaded PVC joints, it's meant for metal fittings like tapered brass. A teflon sealant like Oatey great white compound is what to use.
 
I have used “Teflon” tape in the past with great success, though not with pressure fittings. No leaks.
 
Silicone will work just fine as a permanent fix. It’s a gravity drain, so zero water pressure. As long as you can seal it 100% it will be fine
 
this is all you need right here. 20+ years of using this stuff instead of pipe tape and no issues!
It’s so much better. Someone on R2R taught me about it. I learn everything here!!
 
I think you installed your backwards. Well I don't think, I know you did. Look at the instructions again. Nut is suppose to go on the inside and you also have to cut the threaded side to match your glass thickness. None of the threads should be visible once done.
 
I think you installed your backwards. Well I don't think, I know you did. Look at the instructions again. Nut is suppose to go on the inside and you also have to cut the threaded side to match your glass thickness. None of the threads should be visible once done.

It’s installed correct. It wouldn’t fit the other way. Here’s my 7 year old version
e8bbb4742401cb1f8f0585b9f0fe3a76.jpg
 
It’s installed correct. It wouldn’t fit the other way. Here’s my 7 year old version
e8bbb4742401cb1f8f0585b9f0fe3a76.jpg

1511152933022521011208.jpg

20171119_233021.jpg

Maybe he has a different version from mine.
But if it works it's all good.
My return lines look like the picture you and the OP put up.
 
The instructions say that installing it correctly will look backwards compared to other systems, but that this is correct.
 
The instructions say that installing it correctly will look backwards compared to other systems, but that this is correct.

What the heck! Looks like my lfs didn’t follow directions on mine! Works both ways it appears, but tidier your way
 
What the heck! Looks like my lfs didn’t follow directions on mine! Works both ways it appears, but tidier your way
Is yours from Glass-Holes? Other overflow/return systems do it the exact opposite. If it wasn’t Glass-Holes, your lfs probably has it right!
 
1511152933022521011208.jpg

20171119_233021.jpg

Maybe he has a different version from mine.
But if it works it's all good.
My return lines look like the picture you and the OP put up.
Oh I see. You’re looking at the overflow here. My problem was with the return side. My overflow side looks the same as yours.
 
Oh I see. You’re looking at the overflow here. My problem was with the return side. My overflow side looks the same as yours.

I have to apologize, I did not read it was the return.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 1 9.1%
  • Lighting, pumps, or other major equipment

    Votes: 2 18.2%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 18.2%
  • Dry goods and restocks, like salt, media, or food

    Votes: 1 9.1%
  • Corals! Must...Have...CORALS!!!

    Votes: 2 18.2%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 9.1%
  • I’m browsing, but don’t have a specific target

    Votes: 1 9.1%
  • I’m not shopping for reef deals this year

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 1 9.1%
Back
Top
Home
Post thread…
Market
What's new