Good Calcium Buffer

  • Thread starter Thread starter Cscultho
  • Start date Start date
  • Tagged users Tagged users None

Cscultho

Active Member
View Badges
Joined
Feb 24, 2017
Messages
360
Reaction score
173
What state or country do you live in
Michigan
Rating - 0%
0   0   0
Happy Thanksgiving!

Looking for a good and inexpensive calcium buffer for my reef. My calcium Hoover between 380-400 and I’d like to increase it to 450ish. My pH is 8-8.2, alk 9.0.

Thanks for your guidance
 
If you are referring to two part calcium/alkalinity dosing there are a numer of good options. Over time I have settled in on ESV B-ionic. I have had good success with it, and it is relatively cost effective compared to many two part dosing options.
 
Any two part would be OK.
Agree with DrDirt about B-ionic, however it also depends on size of your tank and if you are going to get it from LFS or online.Most of LFS carry B-ionic.
If you have large tank and don't mind mixing stuff yourself I would go for BRS two part Pharma, if you have nano tank, consider All-for-reef.
 
I have a biocube 32 gallon. My alkalinity seems fine but my calcium needs help IMO. I have Kalkwasser but this raise both alk and cal so I’ve stopped Kalk until I get calcium up.

Should I try to only raise calcium?
 
Than I suggest B-ionic.
You can correct calcium levels to desirable one using BRS or other online calculator.
 
Just to clarify, a calcium supplement is not called a buffer. An alkalinity supplement may or may not be a buffer.

I’d just avoid using the term buffer unless you know you really want a buffer.
 
Just to clarify, a calcium supplement is not called a buffer. An alkalinity supplement may or may not be a buffer.

I’d just avoid using the term buffer unless you know you really want a buffer.
Thanks for clarification Randy. What’s your recommendation on a calcium supplement?
 
Happy Thanksgiving!

Looking for a good and inexpensive calcium buffer for my reef. My calcium Hoover between 380-400 and I’d like to increase it to 450ish. My pH is 8-8.2, alk 9.0.

Thanks for your guidance
Look on Amazon for food grade calcium chloride (CaCl3)

Then use the reef chemistry calculator to ascertain the amount to dose.

http://reef.diesyst.com/chemcalc/chemcalc.html
 
I'd look to use a two part alk and calcium method, since you should rarely need calcium and not alk. A DIY, ESV B-ionic, or TM Balling are good choices.
 
I'd look to use a two part alk and calcium method, since you should rarely need calcium and not alk. A DIY, ESV B-ionic, or TM Balling are good choices.
Thanks Randy. Is All for Reef considered a balling method?
 
I dont use buffers but rather calcium chloride
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 11 15.7%
  • Fish or coral food

    Votes: 4 5.7%
  • Test kits or reagents

    Votes: 6 8.6%
  • Filter media or replacement fleece

    Votes: 4 5.7%
  • RO/DI filters or supplies

    Votes: 11 15.7%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 8 11.4%
  • I keep a backup of everything

    Votes: 20 28.6%
  • Other (Post in the comments)

    Votes: 6 8.6%
Back
Top
Home
Post thread…
Market
What's new