Gravity ato

calvo15290

Valuable Member
View Badges
Joined
Sep 3, 2012
Messages
1,905
Reaction score
42
Location
nashville tn
What state or country do you live in
Tennessee
Rating - 0%
0   0   0
I was doing some siphoning and saw when water levels were the same the water stoped when it was lower the water wold add can I do a ato just that way?
 
I bought the $100 nano tunze and it works on my 40g with a 29g sump. I like it because of the auto time out in case of float mishaps.
 
I was doing some siphoning and saw when water levels were the same the water stoped when it was lower the water wold add can I do a ato just that way?

Yes, you sure can. I've been using gravity fed ATOs (a large 'PEt Bottle') for nearly five years on a nano tank. Very reliable way to keep a stable water level and very convenient for dosing Kalkwasser.

The principle can be scaled up to a larger sized tank using a much larger bottle(s), but would be most unobtrusive down with the sump.
 
Last edited:
Yes, you sure can. I've been using gravity fed ATOs (a large 'PEt Bottle') for nearly five years on a nano tank. Very reliable way to keep a stable water level and very convenient for dosing Kalkwasser.

The principle can be scaled up to a larger sized tank using a much larger bottle(s), but would be most unobtrusive down with the sump.
+1 I use gravity fed ato also works very very well and great for dosing kalkwasser as mentioned already
 
I gravity feed to 5 gallon bucket outside my house. Using a kent float valve. If the valve sticks, and the bucket over flows, no big deal. I then go thru the wall using an aqua lifter pump hooked to my controller for top off. I never have to carry heavy containers to top off my top off container.
 
Yes, you sure can. I've been using gravity fed ATOs (a large 'PEt Bottle') for nearly five years on a nano tank. Very reliable way to keep a stable water level and very convenient for dosing Kalkwasser.

The principle can be scaled up to a larger sized tank using a much larger bottle(s), but would be most unobtrusive down with the sump.

In this method, you do have to use a float switch correct?
 
I have 2 float switches in the sump. First one is on/off. The second is for if the first sticks on, it will shut off the pump.
 

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 11 21.2%
  • Powerheads or wavemakers

    Votes: 4 7.7%
  • Sump or rear filtration chambers

    Votes: 8 15.4%
  • Skimmer or other filtration equipment

    Votes: 7 13.5%
  • Overflow or plumbing

    Votes: 10 19.2%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 11 21.2%
  • Other—tell us what I missed

    Votes: 1 1.9%
Back
Top
Home
Post thread…
Market
What's new